THOMSON Chroma Pro II VTH6080 User Manual Download

Page: 1 / 29

ENGLISH

SAFETY INFORMATION

Mains connection

A fused plug must be fitted with a 3A fuse approved by ASTA or

BSI to BS 1362 and fuse covers must always be securely replaced.

If your Video Recorder does not work, the fuse may be blown.

This video is suitable for use on

A.C.

mains supply,

220-240 V

50 Hz

only.

It must not be connected to

D.C.

mains.

Note: The mains lead of the video is fitted with a moulded plug.
Because the lead is detachable and because it contains safety
components we cannot recommend re-wiring.

Do NOT under any circumstances plug the severed plug into any
mains socket as this could result in electric shock.

The OFF button

on the remote control does not completely disconnect

the unit from the mains supply but switches operating power on and off.

U-T7078PE-GB/MR-BEI/912 6/01/00 10:17 Page I

Summary of Contents for Chroma Pro II VTH6080






























Search results

Summary of Contents for Chroma Pro II VTH6080

Reviews:

Related manuals for Chroma Pro II VTH6080

Brands by name

Popular brands

THOMSON Chroma Pro II VTH6080, User Manual

Search results

Summary of Contents for Chroma Pro II VTH6080

Reviews:

Related manuals for Chroma Pro II VTH6080

Brands by name

Popular brands