DO101-P www.thermomart.com
Users should download and install the eWeLink App (available on both Android play store “eWeLink” and iOS
app store “eWeLink-smart home control”).
After installation, register an account with your email address (not phone#) and a password (at least 8
characters). Enter email verification code to register and then login with your account
.
Installation
Please be sure you are close enough to WiFi router and if you have VPN remove it temporary.
Also this
App installs with 2.4G WiFi communication but you can change your WiFi to 5G-WiFi or add VPN after
installation (If you couldn’t change it please check the problem & solutions section, item 4)
. After
downloading the eWeLink App, plug your receiver and wait for 30 second and then
Open the eWeLink
App and
press and hold the LED button on Wifi board. The LED light
blinks 3 times & pause repeatedly.
Click on the “+” icon on your App to search for the device. Next select the 1st pairing method TOUCH icon
(corresponding icon already selected).Then click next
and type your home WiFi ID &
password & click next
(you can release pairing button
when
the LED & App LED simultaneously blink. Press and hold takes
about
7 Sec)
It takes 1-3 minutes for the device to be registered by the App and to be added to your
account
.
You can name the device to complete the process
.
When the LED is on, the device is Online. If the
App still shows
“Offline” you should restart the App and start the above mentioned process again.
After installing the app and making sure that it works correctly (a clicking sound can be heard when you turns
the switch On/Off by app or manually by pairing button) connect the two wires of output to the terminals of
solenoid valve (If you need, you can extend the length of the wire ) .
The input can be 5-24VDC and the output
always be same as input (
Red is + and Black is
-
). The unit come with 12VDC adapter, so the output will be 12VDC.
The package come with white
Silicon sealing strip for water proofing your box, if you want to put it outside.
Supported functions:
Remote ON/OFF –
Turn ON/OFF or Open/Close your connected device from anywhere in the world or at
home by your iOS or Android mobile App.
It has a professional timer
for 8 times Set scheduled/countdown/loop timers to turn your connected
device On/Off or Open/Close, at specified times.
Pre-set timers can work even if the internet is not
connected to the device anymore.
Shared Control –
You don’t need to buy another remote. By downloading the app on another cellphone or
computer you can easily add another remote to your household. You can also remotely add, modify, delete
or enable each additional remote and their authorizations.
When you want to add a remote (share
the device), both Apps should be online, because if the account you want to share is not online,
they
will
not receive the invitation message.
Security -
Each device has a main user that is the only one who is authorized to share the device with
other people. If you wish to transfer the authorization of a registered device to
another account it should
be firstly deleted from the main user’s App.
You can also make a pattern lock password for this app.
