Quick
Start
:
Testo 876, 880, 881, 882
© 2011 The Snell Group / 322 N. Main St. / Suite 8 / Barre, VT 05641 / 800.636.9820
/
www.thesnellgroup.com
Testo 880 Page 1
1.
MEMORY:
Insert the SD memory card in the slot under the bay cover on the left side of the camera (right bay not used).
2.
POWER:
Insert a fully charged battery into the
Battery Bay
until it is flush with the bottom of the handle.
Power can also be supplied by the included AC adapter.
3.
START:
Remove lens cap then push and release the
Power
button, this will initiate the camera’s start sequence.
4.
FOCUS:
Manual Focus: Place the
Focus Selector
to the right position then twist the focusing ring
clockwise or counterclockwise.
Motorized Focus: Place the
Focus Selector
to the left position then focus by pushing or pulling the focus trigger.
5.
AUTO ADJUST
(Level & Span)
:
NOTE: The camera might start in either in auto or manual adjust mode depending on which mode it was in during
last use.
If currently in Manual mode (indicated “M” under the
palette bar) press the
Right Function
button to
show the “Set Scale” menu.
Move the joystick left to highlight the Auto scale
icon then press the
OK
button.
6.
MANUAL ADJUST
(Level & Span)
:
If currently in Auto mode (indicated “A” under the palette bar) press the
Right Function
button to show the “Set
Scale” menu.
Move the joystick right to highlight either the lower scale temp. icon, both upper & lower or the upper
temp. scale icon.
Adjust Span by moving the
Joystick
up and down while either the upper or lower scale temp. is
highlighted.
Adjust Level by moving the
Joystick
up and down while both the upper and lower scale temps. are
highlighted.
Press the
OK
button to hide the Scale menu yet remaining in manual mode.
Image Trigger
Focus Trigger
Focus Ring
Focus
Selector
Joystick/OK
Left function
Palette
& Scale
Auto/Manual
indicator
Escape
Power
Battery
Indicator
Memory
Power &Data
Bay
(on side)
Right Function
Battery
Bay
