1
ternbicycles.com
DuoStand
™
Safety
Do not exceed the load limit of 60 kg (132 lb).
Never leave children on a parked bike unattended.
What’s Included
• DuoStand
• M10 x 30 Bolt x 2
• M10 x 70 Bolt x 1
• M10 Nut x 2
• M10 Washer x 4
• M10 Spring Washer x 1
Installation
Tools required (not included)
• 17 mm Wrench x 2
• 3, 4 or 5 mm Allen Wrench*
* Tool for removing the existing
kickstand may differ depending on
your bike.
Additional Kit Required (For HSD
™
Owners Only)
The DuoStand HSD Kit (sold separately) is required to install the DuoStand on the HSD.
1. Remove the existing kickstand. (
Tool may differ depending on your bike.)
* DuoStand HSD Kit
– M10 x 45 Bolt x 2
– Bushing x 2
– Flat Plate
– Wing-shaped Plate
WARNING
: Route cables as shown
to avoid damage from compression.
2. Install both Bolt Sets in the order and arrangement shown below.
HSD
Other Bikes
Assembly Order
Nut
Washer
Wing-shaped plate*
Bushing*
Bike
Flat plate*
DuoStand
Washer
Bolt*
*
Use parts from the DuoStand HSD Kit.
Mounting Location
Mounting Location
Assembly Order
Nut
Washer
Bike
DuoStand
Washer
Bolt
17 mm
17 mm
35 Nm – 40 Nm
Bike
Bike
17 mm
17 mm
35 Nm – 40 Nm
