SX
57
÷
6
5
470
11
40
500
90
96
0
132
÷ 140
470
G1/2"
G1/2"
Installation guide Alex 1140x500mm - SX
Please read the instructions in full before starting to fit your radiator.
• Please check that all parts listed are present before starting installa
-
tion.
•
Valves are not provided, please make sure that you have them
before you start. This product requires standard 1/2" radiator valves.
• Before drilling holes for the brackets please check that there are no
hidden wires or pipes.
• The plugs supplied are for hard walls masonry only. Please make
sure you are using the correct plug for your wall.
• Terma radiators are designed for closed heating systems.
• The radiator should be fitted at least 100 mm from the floor to
maximise heat efficiency.
• Noting the distances between bracket centres, mark out the
position of the brackets on the wall.
• Drill holes to approximately 80 mm depth using a 10 mm drill bit
and insert rawl plugs (1). Using connecting screw with a washer (2)
attach mounting bracket-1 (3).
• Using bracket to collector fixing screw (5) attach mounting
bracket-2 (6) to radiator.
• Guide all mounting brackets-2 (6) into mounting brackets-1 (3) and
fix with connecting screws (4)
• Connect the water flow using appropriate 1/2" BSP valves. Follow
valves manufacture guidelines for correct installatiion.
• Fill the radiator and purge any trapped air via the bleed valve at the
top of the radiator.
• Wipe your radiator down using a clean damp cloth.
Never use scourers or abrasives.
For all installation and warranty enquiries please
contact Crimson Bear Customer Support on
01535 636256
Refers to water and dual fuel version
22
30
30
Fixing kit content
rawl plug
wall fixing
screw +
washer
mounting
bracket-1
bracket
connecting
screw
bracket to
collector
fixing screw
mounting
bracket-2
air vent
allen key
(1)
(2)
(3)
(4)
(5)
(6)
All manuals and user guides at all-guides.com
all-guides.com
