background image

Printed on 100% recycled paper

 

 

670-000-004/1010   

Temp-O-Matic Oil Furnace 

TMP

Multi-Position 

(Counterflow / Horizontal)

 

 

 

 

Furnace Manual

 

 

Contents

 

Page

 

 

Read this first!............................................................................ 2 

  Check furnace location .............................................................. 3 

  Prepare furnace and place in position ....................................... 6 

  Connect supply and return ducts ............................................... 8 

  Venting..................................................................................... 11 

  Connect fuel oil piping ............................................................. 12 

  Wire furnace and burner .......................................................... 14 

  Start-up .................................................................................... 17 

  Checkout procedure ................................................................ 18 

  Troubleshooting ....................................................................... 19 

  Service and maintenance ........................................................ 20 

  Components and replacement parts........................................ 23 

  Dimensions and ratings ........................................................... 25 

  Owner’s information................................................................. 27 

 

 

Hazard definitions 

 

Hazards  that 

will  cause  severe

  personal  injury, 

death or substantial property damage. 
 
Hazards  that 

can  cause  severe

  personal  injury, 

death or substantial property damage. 
 

 
Hazards  that 

will  or  can  cause  minor

  personal 

injury or property damage. 
 
Special  instructions  on  installation,  operation  or 
maintenance  that  are  important  but  not  related  to 
personal injury or property damage. 
 
 

 
INSTALLER 

–  Read  all  instructions  before 

installing. 

Read page 2 first.

 Follow all instructions 

in proper order to prevent personal injury or death. 

x

  Consider  ducting,  fuel  supply,  venting  and 

installation when determining furnace location. 

x

 

Any  claims  for  damage  or  shortage  in  shipment 

must be filed immediately against the transportation 
company by the consignee. 

 
 

Do  not  store  or  use  gasoline  or  other  flammable 
liquids  or  vapors  near  this  furnace  or  any  other 
appliance. 
 
Ventilate  house  while  operating  furnace  for  the  first 
time. Odors may be emitted for a brief period. 
 
Do  not  alter  this  furnace  in  any  way.  The 
manufacturer  will  not  be  liable  for  any  damage 
resulting  from  changes  made  in  the  field  to  the 
furnace  or  its  components  or  from  improper 
installation. Failure to comply could result in severe 
personal  injury,  death  or  substantial  property 
damage. 

 

USER  –  Please  read  the  following.  Failure  to 
comply could result in severe personal injury, death 
or substantial property damage. 

x

 

This  manual  is  for  use  only  by  your  qualified 
heating installer / service technician. 

x

  Please see the 

Owner’s information

 only, on back 

page of this manual.  

x

  Have  the  furnace  serviced  by  a  qualified  service 

technician, at least annually. 

 
 

This  manual  must  only  be  used  by  a 

qualified 

heating installer / service technician.

 Furnace and 

burner  must  be  installed  and  serviced  only  by  a 
qualified  heating  installer  /  service  technician. 
Failure  to  comply  could  result  in  severe  personal 
injury, death or substantial property damage. 

 

When  calling  or  writing  about  the  furnace  –  Please 
indicate  furnace  model  number  and  serial  number 
from rating label. You may list the serial number and 
model  number  in  the  space  provided  on  the 
“Installation  and  service  certificate”  found  on 
page 18. 

KEEP THESE INSTRUCTIONS 
WITH FURNACE FOR FUTURE 
REFERENCE.

 

Summary of Contents for TMP Multi-Position





























Reviews: