PCI Express
®
5.0 x16 Slot Interposer
User Manual and
Quick Start Guide
Components
The interposer package includes the following components:
•
PCI Express 5.0 x16 Slot Interposer
•
Half height bracket
•
Four spare screws for bracket attachment
•
DC Power Adapter (12V @ 8.5Amps)
•
User Manual and Quick Start Guide (this document)
Inspect the received shipping container for any damage. Unpack the container and account for each of the system
components listed on the accompanying packing list. Visually inspect each component for absence of damage.
In the event of damage, notify the shipper and Teledyne LeCroy. Retain all shipping materials for shipper’s inspection.
Introduction
Use this document for quick installation and setup.
The Teledyne LeCroy PCI Express 5.0 x16 Slot Interposer plugs in to a PCIe
®
CEM Connector and allows you to probe PCI
Express traffic between a host and a PCIe expansion card. The interposer assures reliable data transmission while providing
100% capture of all data traffic flowing through the PCIe slot interface. Connecting the interposer to a Teledyne LeCroy
analyzer allows decoding and display of data flowing in both directions and across all lanes, and will display data traffic using
the industry-standard CATC Trace™ data display, along with a wide range of traffic and error reports. The Gen5 x16
Interposer is for use with a Summit T5 Gen5 capable analyzer. The interposer uses Teledyne LeCroy’s T.A.P.5 technology
to ensure complete data capture at Gen5 rates with minimal signal perturbation.
The Gen5 Interposer supports data rates of 2.5 GT/s, 5.0 GT/s, 8.0 GT/s, 16.0 GT/s and 32.0 GT/s, and link width up to x16.
The PCIe connector on the top of the card will support PCIe expansion cards up to x16.
PCI Express 5.0 x16 Slot Interposer
1
2
