Telect, Inc. • USA +1.509.926.6000 • 52.33.3836.37.52
www.telect.com • © 2010 Telect, Inc., All Rights Reserved, 118677-4 A0
Page 1
4x100A Demarcation Breaker
Panel With Alarms
Model 009-7000-0104
Installation Guide
1.1 Overview
Telect's 4 x 100A Demarcation Breaker Panel With Alarms provides breaker protection at
equipment interface. The low profile panel includes four breaker positions with blank face plates,
a replaceable alarm card containing power/alarm cut-off LEDs, visual and audio indicator relays,
and rear-access terminals and wirewrap alarm switch contacts. Each breaker has separate
BATT/RTN inputs and outputs.
Hardware is included for either flush or extended mounting in a 19" or 23" relay rack. Visit our
website (www.telect.com) for ordering accessories and replaceable parts: breakers (up to 100A,
each), lugs, ETSI mounting brackets, and more.
Figure 1 - Model 009-7000-0104
(Listed by UL for US and Canada, File No. E139903; NEBS3 Compliant)
1.2 Inspection
Please read these instructions carefully before beginning installation. If you need assistance, call
Technical Support at 1-888-821-4856 (domestic calls), or 509-921-6161 (Option 2), or email us at
[email protected].
Inspect equipment after unpacking and compare it to the packing list.
Immediately report any shipping damage, defects, or missing parts to Telect at 1-800-551-4567.
Keep all documentation that comes with your shipment.
