1.0
Installation Instructions for
Siber Mirror Surface (Fluorescent)
700BCSIBS_-CF_
1
920BCSIBSCF
GENERAL PRODUCT INFORMATION:
This product is suitable for damp locations.
Bring power supply lines to the mirror in accordance with
local electrical codes.
This instruction shows a typical installation.
C AUTION — RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and DISCONNECT POWER TO THE
ELECTRICAL BOX.
BATH COLLECTION
Install the Hardware
Locate the studs on the wall where the mirror is going
to be mounted (Max 28-1/4" separation).
Use minimum of four slots to mount the back plate to
the studs with four screws and washers provided. Do
not drive the screws all the way in at this time.
1A
Bring the power line to one of the four circular holes on
the backplate.
While holding the back plate level and in the desired
position, tighten the four screws to secure it.
SCREW
BACKPLATE
STUD
1B
POWER LINE
2
WASHER
1
2
1
1
3
4
3
4
4
4
4
2
2
2
2
