![background image](http://html1.mh-extra.com/html/te-connectivity/d369-series/d369-series_instruction-sheet_3983430001.webp)
1
of 3
© 2016 TE Connectivity family of companies
All Rights Reserved
*Trademark
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at
Instruction Sheet
408-32194
09 MAR 16
Rev A
For an overview of D369 series connectors,
For receptacle part numbers, refer to the customer drawings given in Figure 1.
Figure 1
NOTE
Dimensions in this instruction sheet are in metric units [with U.S. customary units in brackets]. Figures are not drawn to scale.
1.
ASSEMBLY
1. Crimp the contacts following the
guidelines given in SAE AS39029, “General Specification for
Contacts and Electrical Connector
s”, then insert the contacts into the receptacle contact cavities.
2. Refer to Figure 2 and ensure that the panel gasket is compatible with the receptacle size and panel
thickness. The number of panel gasket identifiers corresponds to the panel thickness. If it is not
compatible:
a. From the mating face of the receptacle, pull the panel gasket from the receptacle.
b. Choose the appropriate panel gasket. Refer to Figure 2.
c. With the back (side without pads) of the panel gasket facing the mating face of the receptacle,
align the panel gasket identifiers with the receptacle panel latch (on top or bottom), then slide the
panel gasket onto the receptacle and hook the back over the receptacle flange. See Figure 2.
RECEPTACLE SIZE
PANEL THICKNESS (mm [in.]) ±0.10 [±.004]
1.27 [.05]
1.60 [.06]
2.03 [.08]
PANEL GASKET 612154-(Suffix Number) Number of Receptacle Panel Gasket Identifiers
2
3
4
3
3-A
3-B
3-C
6
6-A
6-B
6-C
9
9-A
9-B
9-C
Figure 2
D369 Series Panel-Mount
Receptacle Connectors
Size 3 Receptacle
Size 6 Receptacle
Size 9 Receptacle
Mating Face
of Receptacle
Panel Gasket
Pad (4 Places)
Panel Gasket
Identifiers (2 Shown)
Receptacle Panel
Latch (Top Shown)
Panel Gasket Installed on Receptacle
Panel Gasket Identifiers
Aligned with Top
Panel Gasket Identifiers
Aligned with Bottom
Receptacle
Flange
Mating Latch (Ref)