Instruction Sheet
Manual Arbor Frame Assembly
408--6923
LOC B
1
of 3
E
2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
All Rights Reserved
TE logo is a trademark.
*Trademark. Other product names, logos, or company names might be trademarks of their respective owners.
TOOLING ASSISTANCE CENTER 1--800--722--1111
PRODUCT INFORMATION 1--800--522--6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at
www.te.com
11 Mar 11 Rev D
58024- 1
PROPER USE GUIDELINES
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low volume
applications. A wide selection of powered application equipment for extended--use, production operations is available.
Figure 1
Frame
Handle
Handle Adjusting Knob
Ram (Retracted)
Adjustment
Ring
Mounting Holes
(4 Places)
Base Plate
Setscrew
Plug Button
50.8 mm
[2 in.] (Ref)
1. INTRODUCTION
Manual Arbor Frame Assembly 58024--1, shown in
Figure 1, provides the necessary force to drive
various tooling assemblies (upper and lower tooling)
to be used for a specific purpose.
Dimensions in this instruction sheet are in
millimeters [with inches in brackets]. Figures are
not drawn to scale.
Reasons for reissue of this instruction sheet are
provided in Section 7, REVISION SUMMARY.
2. DESCRIPTION
The arbor frame assembly features a bench--
mountable frame, base plate, handle, handle
adjusting knob, adjustment ring, and ram. The handle
is adjustable for storage.
3. SETUP AND OPERATION
1. Grasp the handle, and loosen the handle
adjustment knob sufficiently for the handle to slide.
FULLY extend the handle. Tighten the knob,
making sure that the screw enters the last hole in
the handle.
2. Secure the arbor frame assembly to a
workbench to ensure stability during operation.
Refer to Figure 2 for mounting hole dimensions.
Figure 2
172.2 [6.78]
127 [5]
164.6 [6.48]
7.14 [.281]
Dia
Front of Arbor Frame Assembly
Mounting Hole Dimensions
NOTE
i
