manualshive.com logo in svg
background image

Read instruction manual before use. Operation of this nozzle without understanding the
manual and receiving proper training can be dangerous and is a misuse of this
equipment. Call 800-348-2686 with any questions.

INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE

This manual should be kept available to all operating and maintenance personnel.

This instruction manual is intended to familiarize firefighters and maintenance personnel
with the operation, servicing and safety procedures associated with the Metro 1 and
Metro 2 fire fighting nozzles.

WARNING

WARNING

WARNING

©Copyright Task Force Tips, Inc. 2002-2008

MANUAL:  Metro 1 & 2

Fixed Gallonage Nozzle

2351 Industrial Drive• Valparaiso , IN 46383-9511 USA

800-348-2686 • 219-462-6161 • Fax 219-464-7155

Made in USA • www.tft.com

TASK FORCE TIPS, Inc.

ME1-TO

ME1-STO

ME2-BLITZ

ME1-VPGI

Metro

1

Metro

1

Metro

1

Metro

2

LIN-040 October 28, 2008 Rev 05

The member companies of FEMSAthat provide emergency response equipment and services want responders to know and understand the following:

1. Firefighting and Emergency Response are inherently dangerous activities requiring proper training in their hazards and the use of extreme caution at all

times.

2.

3. It is your responsibility to know that you have been properly trained in Firefighting and /or Emergency Response and in the use, precautions, and care of

any equipment you may be called upon to use.

4. It is your responsibility to be in proper physical condition and to maintain the personal skill level required to operate any equipment you may be called

upon to use.

5. It is your responsibility to know that your equipment is in operable condition and has been maintained in accordance with the manufacturer’s instructions.

6. Failure to follow these guidelines may result in death, burns or other severe injury.

It is your responsibility to read and understand any user's instructions, including purpose and limitations, provided with any piece of equipment you may be called

upon to use.

Fire and Emergency Manufacturers and Services Association, Inc.

P.O. Box 147, Lynnfield, MA 01940 • www.FEMSA.org

FEMSA

DANGER

PERSONAL RESPONSIBILITY CODE

Содержание METRO 1 Series













Отзывы: