background image

©Copyright Task Force Tips, Inc. 2011-2013 

LIG-012 April 9, 2013 Rev02

MANUAL: G-Force Nozzle

Fixed, Selectable, Automatic and 
Automatic with Flow Limiting

INSTRUCTIONS FOR SAFE OPERATION AND MAINTENANCE

WARNING

Read Instruction Manual before use. Operation of this nozzle without understanding the manual 
and receiving proper training can be dangerous and is a misuse of this equipment. Call 800-348-
2686 with any questions.

NOTICE

This Instruction Manual is intended to familiarize fi refi ghters and maintenance personnel with 
the operation, servicing, and safety procedures associated with the G-Force nozzle.

NOTICE

This manual should be kept available to all operating and maintenance personnel.

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 • 219-462-6161 • Fax 219-464-7155

DANGER

PERSONAL RESPONSIBILITY CODE

The member companies of FEMSA that provide emergency response 
equipment and services want responders to know and understand the 
following:

1. Firefi ghting and Emergency Response are inherently dangerous activities 

requiring proper training in their hazards and the use of extreme caution 
at all times.

2. It is your responsibility to read and understand any user’s instructions, 

including purpose and limitations, provided with any piece of equipment 
you may be called upon to use.

3. It is your responsibility to know that you have been properly trained in 

Firefi ghting and /or Emergency Response and in the use, precautions, and 
care of any equipment you may be called upon to use.

4. It is your responsibility to be in  proper physical condition and to maintain 

the personal skill level required to operate any equipment you may be 
called upon to use.

5. It is your responsibility to know that your equipment is in operable 

condition and has been maintained in accordance with the manufacturer’s 
instructions.

6. Failure to follow these guidelines may result in death, burns or other 

severe injury.

FEMSA

Fire and Emergency Manufacturers and Service Association

P.O. Box 147, Lynnfi eld, MA  01940 • www.FEMSA.org

Summary of Contents for G-Force

















Reviews: