TASCAM M-3500 MIXING CONSOLE
1
Figure 1
Figure 2
INPUT SECTION
The mixer is able to select two seperate user inputs, the
line input jack or the mic input jack. The line input
jack is a 1/4” female jack and the the mic input jack is
an XLR female jack (See figure 1). Figure 2 shows the
input section controls, the first section of the mixing
board. The red knob adjusts the input level from the
mic input jack and the gray knob adjusts the input level
from the line input jack. If these knobs do not reduce
the input level enough, the “PAD” button can be
pressed to reduce the level by -30 dB. Pressing the
“LINE” button selects the line input jack. If it is not
depressed, the mic input jack is selected.
The “PWR” button activates the phantom power on the
mic input jack. The “FLIP” button will retard the
phase of the input by 180 degrees. The “HPF” button
is used to activate a high pass filter for the mic input
jack, in order to compensate for proximaty effects.
