Privacy film for tablet (2-way)
Open Size: 177.8W x 215.9H mm
Diecut
Color: Grayscale
October 7, 2014 3:54 PM
AST001EU-A_UG_100714
Privacy film for tablet (2-way)
Open Size: 177.8W x 215.9H mm
Diecut
Color: Grayscale
October 7, 2014 3:54 PM
AST001EU-A_UG_100714
45
o
45
o
1
CAUTION
• Do not exert excessive force or use an abrasive cloth when cleaning the
surface of the privacy screen
• Do not bend the privacy screen
Quick
Start
2
ATTACHMENT INSTRUCTIONS:
1. Clean tablet screen and place the privacy screen on the table, preferred viewing side down.
2. Remove a short adhesive strip from liner.
3. Attach to the end of one of the long adhesive strips.
4. Pull the long strip up while holding onto the short strip.
5. Position the long adhesive close to the edge of screen, centered vertically.
6. Apply pressure firmly along length of strip, removing any air bubbles.
7. Pull back on the remaining short piece of adhesive to remove the blue plastic from the long adhesive strip. Once removed, the long adhesive strip should remain on the
privacy screen. Repeat steps 2-7 to apply adhesive strip to the other end of the privacy screen (same side).
8. Position the privacy screen on your tablet starting at the bottom. Press along adhesive to securely attach.
TO “REFRESH” ADHESIVE STRIPES:
Remove the privacy screen from your tablet, then rinse the privacy screen under running warm water,
rubbing adhesive lightly with your finger to remove debris. Gently fan filter to dry.
Or use transparent tape to remove surface debris.
Quick Start
410-3089-001A
Model: AST
GB-1
N2953
2 YEAR LIMITED WARRANTY: We pride ourselves on the quality of our products. For complete warranty details and a list
of our worldwide offices, please visit www.targus.com. Features and specifications are subject to change without notice.
All trademarks and registered trademarks are the property of their respective owners.
©2014 Manufactured or imported by
Targus Europe Ltd., Feltham, Middlesex, TW14 8HA, UK. All rights reserved.
