TWS 353094
SCHWERE PLATTFORMWAGON
TYPE SSY 60TON
Congratulations on purchasing one of the finer aftermarket resin kits sets available.
The photo below is of the completed kit. The Panther tank is not included with this kit. You will note
that we have broken the build into several sub-assemblies. Please note each sub assembly will have it’s
own parts list as well as part numbers. So look over these instructions to get familiar with what will be
involved in the construction of this kit. You will also need to have some additional supplies to complete
this kit. You will need some 5 minuet epoxy, wood glue and several drill bits. The drill bit numbers will
be called out on the respective sub assemble. We also recommend you have a set of track to aid in the
truck assembly. Tank Workshop sells a three piece set of track TWS 354003. We can also recommend
Trumpeter's German Railway Track set kit #00213.
We recommend washing the parts in warm soapy water or a commercially available mold release
cleaner to remove any residual mold release agent. We also recommend leaving the parts on the
casting blocks until called out for. Once the part is called out for dry fit to make sure the parts fit
and align properly
Assembly
The first sub-assembly will be the frame of the car. Please reference the next page for the parts
list and the assembly steps. We recommend you use a square to make sure the frame is perfectly
square. You may use the provided wooden deck to make sure you fit the frame together squarely.
15
14
13
12
