background image

MODEL NO. AT202A12, AT202A14

CAUTION

Read all safety instructions carefully before attempting to operate. Retain for future reference.

SAFETY

OPERATION

MAINTENANCE

Electric String Trimmer

USER MANUAL

DOUBLE INSULATED

1

GENERAL SAFETY RULES

GB

WARNING!

When using electric tools, basic safety precautions, including the following, should always be followed to

reduce the risk of fire, electric shock and personal injury.
Read all these instructions before operating this product and save these instructions.

Meaning of symbols marked on the product

Read the user manual before using the machine

Wear safety goggles to protect your eyes

Wear ear protector to protect against noise

Wear gloves to protect your hands

Wear safety boots to protect against electric shock

Do not expose to rain

Wear dust mask to protect against dust

Remove plug from the mains immediately if cable is damaged or cut

•   

Keep work area clean

Cluttered areas and benches invite injuries.

•  

Consider work area environment 

Do not expose power tools to rain. Do not use power
tools in damp or wet locations. Keep work area well
lit. Do not use power tools where there is risk to
cause fire or explosion.

•    

Keep children away

Do not let visitors touch the tool or extension cord. All
visitors should be kept away from area.

•     

Store idle tools

When not in use, tools should be stored in a dry, high
or locked up place, out of reach of children.

•   

Do not force the tool

It will do the job better more safely at the rate for
which it was intended.

•    

Use the right tool 

Do not force small tools or attachments to do the job
of a heavy duty tool. Do not use tools for purposes
not intended.

•    

Dress properly 

Do not wear loose clothing or jewellery, they can be
caught in moving parts. Rubber gloves and non-skid
footwear are recommended when working outdoors.
Wear protecting hair covering to contain long hair.

•    

Use safety glasses

Also use face or dust mask if the cutting operation is
dusty.

• 

Do not abuse the cord

Never carry the tool by the cord or yank it to discon-
nect it from the socket. Keep the cord away from
heat, oil and sharp edges.

•  

Do not overreach

Keep proper footing and balance at all times.

•  

Maintain tools with care

Keep cutting tools sharp and clean for better and
safer performance. Follow instructions for lubrication
and changing accessories. Inspect tool cord periodi-
cally and if damaged have it repaired by an author-
ized service facility. Inspect extension cords periodi-

cally and replace, if     damaged. Keep handles dry,
clean and free from oil and grease.

• 

Disconnect tools 

When not in use, before servicing and when chang-
ing accessories such as blades, bits and    cutters.

• 

Avoid unintentional starting

Do not carry a plugged-in tool with a finger on the
switch. Ensure switch is off when plugging in.

•  

Use outdoor extension leads 

When tool is used outdoors, use only extension cords
intended for outdoor use.

•  

Stay alert

Watch what you are doing. Use common sense. Do
not operate tool when you are tired.

• 

Check damaged parts

Before further use of the tool, a guard or other part
that is damaged should be carefully checked to
determine that it will operate properly and perform its
intended function. Check for alignment of moving
parts, free running of    moving parts, breakage of
parts, mounting and any other conditions that may
affect its operation. A guard or other part that is dam-
aged should be properly repaired or replaced by an
authorized service centre unless otherwise indicated
in this instruction manual. Have defective switches
replaced by an authorized service facility. Do not use
the tool if the switch does not turn it on and off.

•  

Warning!

The use of any accessory or attachment, other than
those recommended in this instruction    manual, may
present a risk of personal injury.

• 

Have your tool repaired by a qualified person

This electric tool is in accordance with the relevant
safety requirements. Repairs should only be carried
out by qualified persons using original spare parts,
otherwise this may result in considerable danger to
the user.

• 

Plug and Socket

Please choose the right type of plug and socket by
international codex.

6096-202A01

Summary of Contents for AT202A12

Page 1: ...rd Never carry the tool by the cord or yank it to discon nect it from the socket Keep the cord away from heat oil and sharp edges Do not overreach Keep proper footing and balance at all times Maintain tools with care Keep cutting tools sharp and clean for better and safer performance Follow instructions for lubrication and changing accessories Inspect tool cord periodi cally and if damaged have it...

Page 2: ... all parts of the body 11 Remain in a stable and secure position while operating the trimmer 12 Keep the area being cut free from wires stones and debris 13 Do not cut against hard objects This could cause injury or damage the trimmer 14 Use the edge of the guard to keep the trimmer away from walls surfaces miscellaneous things and deli cate objects 15 Never use the trimmer without the guard 16 Be...

Page 3: ...PERATING AS AN EDGER Fig 6D 6E 6F With the unit configured as an edger hold it so that the motor is to your left side and debris is thrown to the rear Always use eye protection Fig 3C Fig 3D STARTING CAUTION A short or worn nylon line cuts less efficiently so to improve its operation on subsequent occasions tap the spool button A lightly on the ground while the trimmer is running This will bring a...

Page 4: ...ified tech nician at an authorized service centre 1 Place switch in OFF position and unplug the power supply before the appliance is serviced cleaned or maintenance is performed 2 Keep air intake clean and air vents free of debris to avoid overheating the motor 3 Clean with a damp sponge and mild soap Do not squirt with water hose with water or other liquids 4 No lubrication is necessary as the mo...

Reviews: