Installation manual: Tähtisaunat Moderni/Elegance/Original Opposite-Facing Benches.
Thank you for ordering a Tähtisaunat bench package! This manual contains installation instructions for the
opposite-facing benches of the Moderni, Elegance and Original models. In addition to the manual, Tähtisaunat
includes photos of the bench you are going to install. This will make your bench installation easier, because our
products are always custom-made. Below are some sample photos of the bench featured in this installation
manual. This manual is about the opposite-facing Moderni bench, but this manual is also suitable to use with
the Elegance and the Original models. It is recommended to oil the bench sections before installation, but only
when the final cleaning has been done. This manual includes photos of a few different benches, so that you
could have an overview of the most common set-ups within the same manual. We will never be able to provide
an entirely comprehensive manual, because every bench is custom-made, designed to be the perfect fit for every
customer's sauna.
For the installation, you will need at least a cordless drill or a screwdriver, TX20 Torx Power Bit, TX25 Torx
Power Bit, a spirit level, a 17 mm ring spanner, a tape measure, and a few hours of your time.
Finished photo:
Frame photo:
Installation stages:
1. The bench package includes two kinds of feet of different lengths, the longer of which support the upper bench, and
the shorter of which support the lower bench. First, attach the longer feet securely to the lower frame. The feet are usually
