Model no.: SW0042
Front
English
INSTRUCTION MANUAL
Wireless Charger
Parts:
1. Wireless charging surface
2. Micro USB Type B female socket (charging port)
3. Power-up logo
4. Charging ring
Accessories:
USB Charging Cable x 1pc
Specifications:
1. Wireless Charging Standard: Qi-BPP/Samsung Fast-Charge Standard
2. Input Power: 18W (max.)
3. Input Voltage: 5V, 9V
4. Input Connector: micro USB Type B female socket
5. Output Power: 10W (max.) (support 10W/5W for android mobile, 7.5W for iphone)
6. Standby Power: <0.2W
7. Charging Distance between coils: 3-8mm
8. Charging Efficiency: 70~80% at 10W
9. Charging Area: 10mm x 10mm
10. Charging Device Number: 1
11. Charging Coil Standard: A11
12. Protections: over-current, over-voltage, over-temperature, FOD (fault object detections)
13. Operating Temperature: 0 ~ 35 degree C
14. Storage Temperature: -20 ~ 70 degree C
Operations:
1.
Connect the wireless charger with USB or QC 2.0/3.0 or compatible adapter, the
power-up logo
turns on. It turns off again when there is a charging.
2.
USB adapter uses 5V/2A power rating.
3.
To activate fast charging function, QC 2.0/3.0 or compatible adapter with 9V output
must be used.
4.
Place a supported mobile device in the center of the charging surface. For good charging
status, charging ring turns on.
5.
When the mobile device is fully charged, remove it from the wireless charger.
6.
For fail charging status, the charging ring turns on in a flashing pattern. Try to disconnect
the charger from the wireless charger and reconnect it.
Security and Precautions:
1.
You may need to purchase a charger separately.
2.
Unauthorized chargers may cause damage or the wireless charger may malfunction.
3.
Do not place foreign materials, such as metal objects, magnets, and magnetic stripe
cards, between the mobile device and the wireless charger. The mobile device may not
charge properly or may be damaged due to overheating.
4.
When the mobile device is not placed on the charging surface properly, or depending on
the location of the mobile device’s wireless charging coil, your mobile device may not
charge properly.
5.
Wireless charging may not work properly if you have attached a thick case to your
mobile device. If your case is thick, remove it before placing your mobile device on the
wireless charger.
6.
If you connect a charger to the mobile device during wireless charging, the wireless
charging feature will be unavailable.
7.
The wireless charger is compatible with WPC certified devices.
8.
Do not bend or damage the USB cable, or loose electrical sockets.
9.
Do not touch the device, power cords, plugs, or the electric socket with wet hands or other
wet body parts.
10.
Do not pull the power cord excessively when disconnecting it.
11.
Do not drop or cause an impact to the charger or the device.
12.
The device contains magnets. The American Heart Association (US) and the Medicines
and Healthcare Products Regulatory Agency (UK) both warn that magnets can affect the
operation of implanted pacemakers, cardioverters, defibrillators, insulin pumps or other
electro medical devices (collectively, “Medical Device”) within the range of 15 cm (6
inches). If you are a user of any of these Medical Devices, DO NOT USE THIS DEVICE
UNLESS YOU HAVE CONSULTED WITH YOUR PHYSICIAN.
13.
Do not use your device near other electronic devices. Do not use your device in a
hospital, on an aircraft, or in an automotive equipment that can be interfered with by
radio frequency.
14.
Do not expose the device to heavy smoke or fumes.
15.
Do not use your device near devices or apparatuses that emit radio frequencies, such as
sound systems or radio towers.
16.
Turn off the device in potentially explosive environments.
17.
Do not use the device if it is cracked or broken.
18.
Do not disassemble, modify, or repair your device.
19.
Do not use or store your device in areas with high concentrations of dust or airborne
materials.
20.
Prevent the charging port from contact with conductive materials, such as liquids, dust,
metal powders, and pencil leads.
21.
Do not store your device near magnetic fields.
22.
Do not store your device near or in heaters, microwaves, hot cooking equipment, or high
pressure containers.
23.
Keep your device dry.
24.
Store your device only on flat surfaces.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
RF Exposure Warning Statements:
This equipment complies with radiation exposure limits set forth for an uncontrolled
environment. This equipment shall be installed and operated with minimum distance 20cm
between the radiator & body.
ISED RF Exposure Warning Statements:
This equipment complies with radiation exposure limits set forth for an uncontrolled
environment. This equipment shall be installed and operated with minimum distance 10cm
between the radiator & body.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to
the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Caution:
Please note that this product is not a toy. It is intended for decorative purposes only. It is not
suitable for children under 15, as small parts and / or broken parts may present a
CHOKING HAZARD.
1
2
3
4
