50148 • 7 DAY PROGRAMMABLE TIMER
INSTALL INSTRUCTIONS
®
®
Photos and drawings may not be to scale
and are for general reference only.
©
P.Q.L., Inc.
• 2285 Ward Avenue • Simi Valley, CA 93065 • 800-323-8107 • Fax: 877-619-7053
PREMIUM QUALITY LIGHTING
®
!
WARNING
DISCONNECT POWER BEFORE INSTALLING OR SERVICING.
Please read the instructions before you install and use the device.
NOTE:
Your timer works best when used with simple devices like lamps or lighting fixtures. Electronic devices that have complicated booting procedures
may not work as well. This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
SETTING THE TIME:
Before using your timer, you will need to set it up so that it displays the current time. In order to do so, follow the steps below:
1. Use a pen, paper clip, or a similar pointed object to press the RST (reset) button.
2. Press and hold the WEEK/TIME button for approximately three seconds until the day of the week starts flashing on the top of your LCD display screen.
You can press the addition ADJ (adjust) button repeatedly to toggle through the days of the week (Mo for Monday, Tu for Tuesday, We for Wednesday,
Th for Thursday, Fr for Friday, Sa for Saturday and Su for Sunday). Once you have selected the current day of the week, press the WEEK/TIME button to
confirm your selection and move on to the HOUR setting.
3. Once you have selected the current day of the week, and pressed the WEEK/TIME button to confirm your selection, you can now choose the current
hour of the day. You can press the ADJ (adjust) button repeatedly to toggle through the hours of the day. Once you have selected the current time in
hours, press the WEEK/TIME button to confirm your selection and move on to the next time setting.
4. Once you have selected the current time in hours, and pressed the WEEK/TIME button to confirm your selection, you can now choose the current time
in minutes. You can press the ADJ (adjust) button repeatedly to toggle between 00-59 to select the time in minutes. Once you have selected the current
time in minutes, press the WEEK/TIME button to confirm your selection.
5. With the day of the week, hours and minutes now set your timer should now be displaying the current time.
NOTE:
When viewing the time on your LCD display screen you can press the WEEK/TIME button and the ON/AUTO/OFF button simultaneously in order to
toggle between 12 hour and 24 hour display format.
SETTING UP THE PROGRAMS:
In order to synchronize your timer to turn on and/or turn off an electrical device at the time of your choosing, you need to set up a program. Your timer
gives you the option to set a total of 12 total programs, labeled 1, 2, 3, 4, 5, 6, 7, 8, 9 and A, B and C. Follow the steps below in order to setup a program:
1. Press the PROG (program) and WEEK/TIME buttons simultaneously to enter the program setup mode. The LCD display screen will show: “1 ON --: --: --:”.
This message indicates that you are now setting up at which time(s) you wish program 1 to turn on.
USING YOUR TIMER:
To use your timer, simply plug it into a standard power
outlet in your home.
Next, insert the power plug of your electrical device into
the power outlet located on the side of your timer.
Press the ON/AUTO/OFF button “ON,” “AUTO,” “OFF” will
display on the LCD.
ON - ALWAYS ON, timer will skip all setting programs.
AUTO - Active all setting programs.
OFF - ALWAYS OFF, timer will skip all setting programs.
ADJUST BUTTON
PROGRAM BUTTON
WEEK/TIME BUTTON
RESET BUTTON
LCD DISPLAY SCREEN
ON/AUTO/OFF BUTTON
POWER OUTLET
