background image

 

 

 

 

 

 

 

 

 

 

 

 

Congratulations on your purchase of our SUNJOY 10’ x 13’ Pomeroy Domed Top Gazebo. Our clear, 
easy to follow, step-by-step instructions will guide you through the assembly process from start to 
finish. 
 

WARNING: 

 

This unit is heavy. Do not assemble this item alone. 6-8 people are recommended for safe assembly. 

 

Keep all children and pets away from assembly area. Children and pets should be supervised when     

they are in the area of the Gazebo construction. 

 

Keep assembly area at least 6ft/1.8m from any obstruction such as a fence, garage, house, 

overhanging branches, laundry line or electrical wires. 

 

Some parts may contain sharp edges. When assembling and using this product, basic safety 

precautions should always be followed to reduce the risk of personal injury and damage to the product.   

 

Please read all instructions before assembly and use.   

 

Check all bolts for tightness before use, and periodically check and tighten bolts as necessary.

 

 

Assemble on level ground. 

 

For outdoor use only 

 
 
 

 

 

10' x 13' Pomeroy Domed Top Gazebo 

Item# L-GZ702PST

 

IMPORTANT 

Please take time to read these instructions thoroughly and follow each step carefully for safe and easy 

operation. Keep this manual for future reference. 

For technical assistance on assembly or replacement parts, call Sunjoy Industries at 1-866-578-6569 

from 8:30AM to 5:30PM EST, or email us at 

[email protected]

, or visit 

www.sunjoydirect.com

 

for assistance. 

Summary of Contents for L-GZ702PST



















Reviews: