background image

© 2019 by Snow Joe

®

, LLC

All rights reserved. Original instructions.

SAVE THESE INSTRUCTIONS

A Division of Snow Joe

®

, LLC

OPERATOR’S MANUAL

Model 24V-GS-LTW

Form No. SJ-24V-GS-LTW-880E-MR1

R

CORDLESS GARDEN CHEMICAL SPRAYER

24-VOLT MAX* | 1.3 Ah | 1 GAL

IMPORTANT!

Safety Instructions
All Operators Must Read These 

Instructions Before Use

Any electrical appliance can be dangerous if used incorrectly. 

Some of the safety precautions given in this manual apply 

generally to many appliances. Other warnings are specific to 

the use of this cordless sprayer.
Always follow these safety guidelines. Failure to do so may 

result in serious bodily injury or death.

m

WARNING! 

This indicates a hazardous situation, which, 

if not avoided, could result in death or serious injury.

m

CAUTION! 

This indicates a hazardous situation, which, 

if not avoided, could result in minor or moderate injury.

m

DANGER! 

This indicates a hazardous situation, which, 

if not followed, will result in death or serious injury.

General Safety 

m

WARNING! 

This appliance is not intended for use 

by children or by unassisted, unsupervised persons whose 

physical, sensory, or mental capabilities prevent them from 

using it safely. Children should be supervised to ensure that 

they do not play with the appliance.
Before starting up your machine, please check it carefully for 

any defects. If you find any, do not start up your machine. 

Contact your authorized Snow Joe

®

 + Sun Joe

®

 dealer or 

call the Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563).

m

WARNING!

 

Read all safety warnings and instructions. 

Failure to follow the warnings and instructions may result in 

electric shock, fire and/or serious injury.

m

WARNING!

 

When using the  cordless garden sprayer, 

basic safety precautions should always be followed to reduce 

the risk of fire, electric shock, and personal injury. These 

include:

• 

Know your garden sprayer. Read and understand the 

operator’s manual and observe the warnings and instruction 

labels affixed to the tool.

• 

Do not operate the product in explosive atmospheres, 

such as in the presence of flammable liquids, gases or 

dust. Power tools create sparks which may ignite the dust 

or fumes.

• 

Do not expose appliance to rain or wet conditions. 

Water entering a power tool will increase the risk of  

electric shock.

•  Do not allow bystanders or children in the area while 

operating this product. 

Exposure to some chemicals can 

be hazardous.

•  Use right appliance.

 

Do not use appliance for any job 

except that for which it is intended.

•  This product is only suitable for outdoor use.
•  Don’t force appliance. 

It will do the job better and with 

less likelihood of a risk of injury at the rate for which it was 

designed.

• 

Stay alert, watch what you are doing and use common 

sense when operating this product. Do not use while 

you are tired or under the influence of drugs, alcohol or 

medication. A moment of inattention while operating this 

product may result in serious personal injury.

• 

Dress properly. Do not wear loose clothing or jewelry. 

Contain long hair. Keep your hair, clothing, and gloves away 

from moving parts. Loose clothes, jewelry, or long hair can 

be caught in moving parts.

•  Use safety equipment. 

Always wear eye protection with 

side shields or goggles and a dust mask. Protect eyes, skin 

and lungs against drifting spray and during mixing, filling, 

and cleaning.

•  Do not overreach. 

Keep proper footing and balance at all 

times. Do not use on a ladder or unstable support. Stable 

footing on a solid surface enables better control of the 

product in unexpected situations.

• 

Do not use the product if the switch does not turn it on 

and off. 

Any product that cannot be controlled with the 

switch is dangerous and must be repaired.

• 

Store idle appliances indoors. When not in use, 

appliances should be stored indoors in dry, and high or 

locked-up place - out of reach of children.

• 

Maintain appliance with care. Keep clean for best 

performance and to reduce the risk of injury. Follow 

instructions for changing accessories.  

• 

Check damaged parts. Before further use of the 

appliance, a guard or other part that is damaged should be 

carefully checked to determine that it will operate properly 

and perform its intended function. Check for alignment of 

moving parts, binding of moving parts, breakage of parts, 

mounting, and any other condition that may affect its 

1

Summary of Contents for 24V-GS-LTW





















Reviews: