background image

DANGER

FOR YOUR SAFETY-If you smell gas:

1. Open windows.
2. DO NOT try to light any appliance.
3. DO NOT use electrical switches.
4. DO NOT use any telephone in your building.
5. Leave the building immediately.
6. Immediately call your local gas supplier after leaving 

the building. Follow the gas supplier's instructions.

7. If you cannot reach your gas supplier, call the Fire 

Department.

FIRE HAZARD

D o  n o t  s t o r e  o r  u s e  g a s o l i n e  o r  o t h e r 
flammable vapors and liquids in the vicinity of 
this or any other appliance.
Failure to follow these instructions can result in 
death, injury or property damage.

WARNING

WARNING

FIRE AND EXPLOSION

Improper  installation,  adjustment,  alteration,  service 
or maintenance can result in death, injury or property 
damage.  Read  the  installation,  operation  and 
maintenance instructions thoroughly before installing 
or servicing this equipment.

P/N: 65132-8/08                                                                                                            Copyright      2008 By Infrared Dynamics, Inc.                                                                                        Printed in USA

TO THE INSTALLER:

 Please read and understand all instructions prior to installation. Give a copy of this manual to the 

owner after installation.

TO THE OWNER:

 Keep this manual in a safe place in order to provide your serviceman with the necessary information

.

Installation and replacement of gas piping, gas utilization 
equipment,  or  accessories,  and  repair  and  servicing  of 
equipment  shall  be  performed  by  a  qualified  agency 
familiar will all precautions required regarding this type of 
equipment and that has complied with all requirements of 

WARNING

 the authority having jurisdiction.

INSTALLATION, OPERATION & MAINTENANCE MANUAL

MODEL PSA 265 , V, & E

MODEL A242

MODEL A244, V, & E

The Original Outdoor Patio Heater

sun glo

R

Tel: (714) 572-4050  Fax: (714) 572-6093
Toll-Free: (888) 317-5255

INFRARED  DYNAMICS

, INC.

Manufactured by

Yorba Linda, CA 92886 U.S.A.

www.infradyne.com

For indoor/outdoor commercial use 

For residential outdoor use ONLY

Summary of Contents for A242
















Reviews: