![background image](http://html.mh-extra.com/html/strong-mdi/monarch/monarch_installation-manual_1385285001.webp)
1 877 755-3795
www.strongmdi.com
MONARCH
INSTALLATION MANUAL
IMPORTANT
Unpack carefully and verify that all parts
are included in the package. Manipulate frame
and screen with care to avoid any damage.
4- Frame sections (2 - sides with
inserts* and 2 - top and bottom)
8- 1/4-20 X1/2" machine screws
2- Wall brackets
1- PVC screen (in a tube)
Legs (optional):
2- Part A.
2- Part B.
8- 1/4-20 X 1/2"
machine screws
If the box contains two Monarch
structures: each structure is identifi ed with
a color dot, one red and the other green.
REAR VIEW
/
FIGURE 1
READ ALL INSTRUCTIONS BEFORE PROCEEDING
PARTS CHECKLIST:
*Note that the corner
inserts and the wall
bracket mounts are
pre-assembled.
ASSEMBLY
1-
Place the four frame sections as indicated in
fi g.1. on a fl at clean surface, taking care not to
damage the frame fi nish.
2-
Assemble the four sides by inserting the
corners on the top and bottom parts.
3-
Assemble each part with the 1/4-20 screws
supplied. Apply gentle pressure on the corners
while tightening the screws for a nicer joint
fi nish.
4-
Verify the fi nished frame and adjust if
necessary.
5-
Place the screen on the frame ; align the
red dot on the screen with the one on the
frame. Handle screen by the edges only, avoid
touching screen surface.
6-
Attach the screen to the frame with the
snaps and adjust if required. Snaps are pre-
adjusted but may require minor adjustments.
Red dots
Corner insert