1
StompLight Professional DMX Effect Pedal Owner’s Manual
v7.17
Congratulations on your purchase and commitment to your art and your audience!
You will find a registration sticker on the base of your StompLight product. Please go to
www.StompLight.com and register your StompLight to secure your warranty.
Take Heed!
You are going to need a bigger tip jar!
Only use the
StompLight® power adapter that came with your product.
Do not plug a microphone / or an audio source into the DMX jacks on your StompLight products.
These jacks are for DMX connection only.
Restoring Factory Default Settings
1.
Unplug your StompLight® power adapter at the rear panel or switch off the Power Bank.
2.
Wait 10 seconds
3.
Plug-in the StompLight Professional or switch on the Power Bank while holding down the
ON/Off Switch.
4.
This will restore StompLight to the factory settings.
Active Powering your StompLight
In this Owner Manual Active Powering means plugging in and powering up. This is different than
turning your StompLight On/Off using the footswitch. To power up your StompLight plug in the
included StompLight 12-volt 1.5 amp center-positive Power Adapter to a standard power source.
When the unit is actively powered the
Status Light
on the control surface will glow.
Status Light
StompLight® powers up in the Color Wheel Mode (the first of 5 modes available) and with the LED
Lighting Array turned off. StompLight products can also be powered with the optional StompLight
Lithium Ion Power Bank providing hours of "unplugged" operation. If you want to order a StompLight
Power Bank check with your local music store first. If they do not have StompLight® Power Bank
grab one on
www.StompLight.com
