INSRM0516
RELAY INSTALLATION
RM347C SERIES
For further information or to consult this guide online, please visit our website at
www.stelpro.com
The following instructions must be adhered to in order to avoid personal and serious injury, property damage and potentially fatal electric shocks.
Before installing and operating this product, the user and/or installer must read, understand and follow these instructions and keep them handy for future reference.
If these instructions are not followed, the warranty will be considered null and void and the manufacturer deems no further responsibility for this product.
IMPORTANT: This product must be installed and connected by a certified electrician, according to electrical and building codes effective in your region.
Switch off the power at the circuit breaker/fuse before installing, repairing and cleaning the unit.
Make sure the unit is appropriate for the intended use (if needed, refer to the product catalog or a representative).
WARNING
RM347C
To obtain the complete relay installation procedure of a particular product, go to
www.stelpro.com/pro
and to the product page. The installation
procedure may be found under the “ACCESSORIES INSTALLATION GUIDE” tab.
Important points for installation and use
- Connect the relay in accordance with the installation guide available online.
- Make sure to follow the relay specifications.
- This product is not intended for fast cycling modulation. For fast cycling modulation, please use the RE series from Stelpro, which is an electronic relay
series.
- Never replace the unit’s relay with a non-certified relay.
- For additional information, please contact our customer service.
SPECIFICATIONS
Operating temperature: -30°C to 65°C
Storage temperature: -30°C to 65°C
CONTROL SPECIFICATIONS
W: 24VAC / 2.8VA required to close the relay
Class 2
LOAD SPECIFICATIONS
VOLTAGE (VAC)
PURELY RESISTIVE LOAD
CURRENT (A)
FULL LOAD
AMPERAGE (FLA)
LOCKED ROTOR
AMPERAGE (LRA)
120
25
14
84
208/240/277
25
8
48
347
18
L1
L2/N
Charge
Rouge
Noir
RM347C
Noir
Blanc
W (signal)
C (COM)
Contrôle
L1
L2/N
Load
Red
Black
RM347C
Black
White
W (signal)
C (COM)
Control
R
R
TYPICAL WIRING DIAGRAM
