![background image](http://html1.mh-extra.com/html/stealth-acoustics/sa-2400-mkii/sa-2400-mkii_user-manual_1368283001.webp)
Level
EQ
Limiter
Delay
Pass Filters
Setup
Input
EQ Band
EQ Switch
Limiter Switch
Delay xxx ms
LPF
HPF
HPF/LPF
Phase
Volume Max
Limiter
LCD Brightness
Utility
Auto
Analog
Opt.
DSP Presets
Ch 1+2
Ch-1
Ch-1+2
Ch-2
Menu
Pink Noise
Factory Default
Mode Test
Version
1-11
EQ Bypass
EQ On
Limiter Bypass
Limiter On
Parameter=xxbd
Bright / Dim
Ratio
Thresh
Release
Knee
Attack
Save
Load
Phase Reverse
Phase Normal
LPF
HPF
Pass-Through Out
Post-DSP
Pre-DSP (Default)
Auto Standby
Off (default)
On
Noise Switch
Reset
SA2400 Ver.xx.hex
HPF Bypass
HPF on
LPF Bypass
LPF on
Freq=xxHz
Slope=xxdB
Slope=xxdB
Freq=xxHz
Q=xx
F-xHz
G-xxdB
Presets 1-10
On / Off
Factory 6-10
(Read Only)
Users 1-5
Ch-1
Ch-1+2
Ch-2
Input Assign
Programming Menu
Front Panel Navigation
User Guide
2-Channel Amplifier with DSP
©
2016 Stealth Acoustics
For technical support please call your local dealer or contact us directly.
Email: [email protected]
Tel: +1 360 848 6800 StealthAcoustics.com
Important Safety Precautions:
1.
Read these instructions and keep this guide for future reference.
2.
Do not block ventilation openings.
3.
Do not install near any heat sources such as radiating heat registers, or other apparatuses that produce heat.
4.
Do not expose this equipment to rain or moisture.
5.
Do not defeat the safety purposes of the polarization or grounding type plug.
6.
Ensure voltage selection switch on rear panel is set to proper voltage.
7.
Clean only with a soft dry cloth.
8.
Refer all repairs to a qualified service professional.
!
!