background image

1

Star

Manufacturing

International Inc.

10 Sunnen Drive
St. Louis, MO 63143

Phone: (314) 781-2777
Fax: (314) 781-2714

Installation and

Operating Instructions

Instructions d’installation 

et d’opération

ULTRA-MAX™ GAS GRIDDLE MODELS

GRILS A GAZ ULTRA-MAX MODELES

 

824M 

 824T  824TS 

824TSCHS

 

836M 

 836T  836TS 

836TSCHS

 

848M 

 848T  848TS 

848TSCHS

 

860M 

 860T  860TS 

860TSCHS

 

872M 

 872T  872TS 

872TSCHS

   2M-Z4877  Rev. E   8/3/2006

WARNING:  Improper installation, 
adjustment, alteration, service or 
maintenance can cause property 
damage, injury or death.  Read the 
installation, operating and maintenance 
instructions thoroughly before installing 
or servicing this equipment.

WARNING:  This appliance shall be 
installed in accordance with current 
regulations and used only in well-
ventilated space.  Refer to instructions 
before installing and using this 

In addition, there should be posted, in a 
prominent location, detailed instructions 
to be followed in the event the operator 
smells gas.  Obtain the instructions from 
the local gas supplier.

AVERTISSEMENT

: L’installation inexacte, le ré-

glage, le changement, le service ou l’entretien peu-
vent causer des dégats matériels, des dommages 
ou la mort. Lisez les instructions d’installation, 
d’opération et d’entretien complètement avant 
d’installer ou entretenir ce matériel. 

AVERTISSEMENT

: Cet appareil sera installé 

selon des règlements actuels et utilisé seule-
ment dans l’espace bien-aéré. Référez-vous aux 
instructions avant d’installer et utiliser cet appa-
reil. 

POUR VOTRE SÛRETÉ

: N’enregistrez pas ou 

n’utilisez pas l’essence ou d’autres vapeurs ou liq-
uides infl ammables à proximité de ceci ou d’aucun 
autre appareil. 

En outre, là devrait être signalé, dans un emplace-
ment en avant, des instructions détaillées d’être 
suivi en cas que l’opérateur sent le gaz. Obtenez 
les instructions du fournisseur local de gaz. 

FOR YOUR SAFETY:  

Do not store or 

use gasoline or other fl ammable vapors or 
liquids in the vicinity of this or any other 

Summary of Contents for 824M









































Reviews: