background image

Record the key number from the back of the cabinet.
Keep keys in a secure place away from children.
Do not store this document in the cabinet 

Tools Required:  #2 Phillips screwdriver, 7/16” socket wrench, 

drill, 3/16” drill bit
Two people required for assembly

40350-1309

27

1

Instructions

TC-16-GB-K

PARTS INCLUDED

PARTS INCLUDED

Key #:

WARNING

Tip Over Hazard

A child or adult can tip the cabinet and be killed or 

seriously injured.
Failure to secure the cabinet as shown in these 

instructions can result in death or serious injury to 

children and adults.
Children should not play with or around the 

cabinet at any time.

NOTE: You can store your Key # on Stack-On’s SECURE web site – 

www.stack-on.com under Service.  Storing your Key # will provide 

instant access to this important information, should you ever lose 

your keys or need the number to order a new set.  Only you will 

have access to this information.

#8-32 x 1/2” 

Bolt and Nut (32)

Partition (2)

Top Shelf (1)

Top Shelf Foam 

(1)

Bottom Foam (2 parts)

Bracket (2)

2-Position Barrel 

Rest (2)

5-Position Barrel 

Rest (2)

Scope Standoff (4)

Tactical Gun Rest (2)

Tactical Stock Rest (1)

Shelf (5)

Shelf Foam (5)

#8 x 1/2” Screw (12) 

#8 x 1/2” Screw (2) 

#10-16 x 3/8”

Thread Forming Screw (6) 

1/4” x 1-1/2”

Lag Screw and Washer (4) 

Thread Cap (6) 

Plug (2) 

A

B

C

D

E

F

G

G

TYPE

Summary of Contents for TC-16-GB-K




























Reviews: