SportsArt Fitness P756 Owner'S Manual Download

Page: 1 / 40

1. INTRODUCTION..................................................................................................

2. IMPORTANT SAFETY PRECAUTIONS...............................................................

3. LIST OF PARTS...................................................................................................

4. ASSEMBLING THE PRODUCT

STEP 1 Seat Frame and the Connector Installation..........................................

STEP 2 Weight Stack Installation.......................................................................

STEP 3 Cable Installation..................................................................................

STEP 4 Cable Adjustment..................................................................................

STEP 5 Cable Slack Adjustment........................................................................

STEP 6 Foot Press Plate Installation.................................................................

STEP 7 Handle Installation.................................................................................

STEP 8 Seat Bottom Installation........................................................................

STEP 9 Seat Back Installation...........................................................................

STEP 10 Apply the Weight Stack Sticker............................................................

STEP 11 Cover Support Plate Installation...........................................................

STEP 12 Front Cover and Rear Cover Installation..............................................

STEP 13 Top Covers Installation..........................................................................

STEP 14

........................................................................

STEP 15

..........................................................................

5. OPERATION INSTRUCTION................................................................................

6. MAINTENANCE.....................................................................................................

MAINTENANCE Schedule....................................................................................

MAINTENANCE Task List......................................................................................

MAINTENANCE One-Year Maintenance Log.......................................................

7. CONSIGNES DE SECURITE IMPORTANTES.....................................................

Storage Tray Installation

Stack Fork Inspections

P756 OWNER’S MANUAL CONTENTS

‘

Summary of Contents for P756









































Search results

Summary of Contents for P756

Reviews:

Related manuals for P756

Brands by name

Popular brands

SportsArt Fitness P756, Owner'S Manual

Search results

Summary of Contents for P756

Reviews:

Related manuals for P756

Brands by name

Popular brands