![background image](http://html1.mh-extra.com/html/spit/pulsa-700e/pulsa-700e_operators-manual_1348631001.webp)
www.itwcp.co.uk
Technical Helpline UK: 0800 731 4924
Technical Helpline ROI: 1 800 882 388
Pulsa Operator Guide
Safety instructions
GB
Not following the safety precautions may cause
injury to yourself or others. Strictly follow the
safety precautions.
Wear ear defenders.
Wear safety glasses.
Only use the tool for its intended use.
This is not a toy. Never point it at people.
Always assume that the tool is loaded.
Never transport the tool with your finger on the trigger.
Never place your hand over the nosepiece.
When servicing, remove the fuel cell, battery and nails from the magazine.
Warning: the contents of the fuel cell are flammable.
The fuel cell is under pressure. Protect it from temperatures above 50°C
(sunlight).
Do not open, puncture or burn the fuel cell.
Keep the fuel cell away from flames, sparks and heat. Do not spray near flames
or incandescent objects.
The fuel cell cannot be recharged. Do not attempt to fill or recycle it.
Place empty fuel cells in the bio-bag and send to SPIT After-Sales Service.
Keep tool, fuel cells and battery away from children.
Only use the tool in well-ventilated areas. Store the fuel cells in a well-ventilated
place.
For reasons of safety and operation, it is imperative that only SPIT-compatible
fuel cells and nails be used. SPIT does not license any other company to
manufacture fuel cells and nails and can only guarantee the quality and
performance of its own, genuine products. SPIT cannot accept responsibility for
damage or injury caused by the use of third party fuel cells and nails which are
not SPIT-compatible.
In particular, your product warranty will not cover damage
to the Pulsa 700 caused by non-compatible parts.
Do not use the PULSA 700 in rainy or excessively humid conditions.
IMPORTANT INFORMATION ABOUT SAFETY REQUIREMENTS
The European Standard EN 792-13 has established certain safety requirements
for hand-help non-electric fastener driving tools and it requires the respective
instructions to be part of the tool operating manual. In your own interest, we urge
you to follow such safety requirements without exception.
SPIT Fastener driving tools operated by internal combustion shall only be used
with dispensers for combustible gas which are listed in the SPIT operating
instruction (Item 7.2.5a). For the SPIT Pulsa tool, this means the use of SPIT
specified Pulsa Fuel Cells.
Only those fasteners listed in the SPIT operating instruction may be used in the SPIT
fastener driving tool (Item 7.2.1a). The fastener driving tool and the fastener listed
in the operating instruction must be seen as one unit system in terms of safety.
Only the fuel cells and lubricants listed in the SPIT operating instruction may be
may be used (Item 7.2.1b).
For the maintenance of SPIT fastener driving tools, only spare parts specified by
the manufacturer or his authorized representative shall be used (Item 7.2.1e).
Safety instructions
GB
Not following the safety precautions may cause
injury to yourself or others. Strictly follow the
safety precautions.
Wear ear defenders.
Wear safety glasses.
Only use the tool for its intended use.
This is not a toy. Never point it at people.
Always assume that the tool is loaded.
Never transport the tool with your finger on the trigger.
Never place your hand over the nosepiece.
When servicing, remove the fuel cell, battery and nails from the magazine.
Warning: the contents of the fuel cell are flammable.
The fuel cell is under pressure. Protect it from temperatures above 50°C
(sunlight).
Do not open, puncture or burn the fuel cell.
Keep the fuel cell away from flames, sparks and heat. Do not spray near flames
or incandescent objects.
The fuel cell cannot be recharged. Do not attempt to fill or recycle it.
Place empty fuel cells in the bio-bag and send to SPIT After-Sales Service.
Keep tool, fuel cells and battery away from children.
Only use the tool in well-ventilated areas. Store the fuel cells in a well-ventilated
place.
For reasons of safety and operation, it is imperative that only SPIT-compatible
fuel cells and nails be used. SPIT does not license any other company to
manufacture fuel cells and nails and can only guarantee the quality and
performance of its own, genuine products. SPIT cannot accept responsibility for
damage or injury caused by the use of third party fuel cells and nails which are
not SPIT-compatible.
In particular, your product warranty will not cover damage
to the Pulsa 700 caused by non-compatible parts.
Do not use the PULSA 700 in rainy or excessively humid conditions.
IMPORTANT INFORMATION ABOUT SAFETY REQUIREMENTS
The European Standard EN 792-13 has established certain safety requirements
for hand-help non-electric fastener driving tools and it requires the respective
instructions to be part of the tool operating manual. In your own interest, we urge
you to follow such safety requirements without exception.
SPIT Fastener driving tools operated by internal combustion shall only be used
with dispensers for combustible gas which are listed in the SPIT operating
instruction (Item 7.2.5a). For the SPIT Pulsa tool, this means the use of SPIT
specified Pulsa Fuel Cells.
Only those fasteners listed in the SPIT operating instruction may be used in the SPIT
fastener driving tool (Item 7.2.1a). The fastener driving tool and the fastener listed
in the operating instruction must be seen as one unit system in terms of safety.
Only the fuel cells and lubricants listed in the SPIT operating instruction may be
may be used (Item 7.2.1b).
For the maintenance of SPIT fastener driving tools, only spare parts specified by
the manufacturer or his authorized representative shall be used (Item 7.2.1e).
Safety instructions
GB
Not following the safety precautions may cause
injury to yourself or others. Strictly follow the
safety precautions.
Wear ear defenders.
Wear safety glasses.
Only use the tool for its intended use.
This is not a toy. Never point it at people.
Always assume that the tool is loaded.
Never transport the tool with your finger on the trigger.
Never place your hand over the nosepiece.
When servicing, remove the fuel cell, battery and nails from the magazine.
Warning: the contents of the fuel cell are flammable.
The fuel cell is under pressure. Protect it from temperatures above 50°C
(sunlight).
Do not open, puncture or burn the fuel cell.
Keep the fuel cell away from flames, sparks and heat. Do not spray near flames
or incandescent objects.
The fuel cell cannot be recharged. Do not attempt to fill or recycle it.
Place empty fuel cells in the bio-bag and send to SPIT After-Sales Service.
Keep tool, fuel cells and battery away from children.
Only use the tool in well-ventilated areas. Store the fuel cells in a well-ventilated
place.
For reasons of safety and operation, it is imperative that only SPIT-compatible
fuel cells and nails be used. SPIT does not license any other company to
manufacture fuel cells and nails and can only guarantee the quality and
performance of its own, genuine products. SPIT cannot accept responsibility for
damage or injury caused by the use of third party fuel cells and nails which are
not SPIT-compatible.
In particular, your product warranty will not cover damage
to the Pulsa 700 caused by non-compatible parts.
Do not use the PULSA 700 in rainy or excessively humid conditions.
IMPORTANT INFORMATION ABOUT SAFETY REQUIREMENTS
The European Standard EN 792-13 has established certain safety requirements
for hand-help non-electric fastener driving tools and it requires the respective
instructions to be part of the tool operating manual. In your own interest, we urge
you to follow such safety requirements without exception.
SPIT Fastener driving tools operated by internal combustion shall only be used
with dispensers for combustible gas which are listed in the SPIT operating
instruction (Item 7.2.5a). For the SPIT Pulsa tool, this means the use of SPIT
specified Pulsa Fuel Cells.
Only those fasteners listed in the SPIT operating instruction may be used in the SPIT
fastener driving tool (Item 7.2.1a). The fastener driving tool and the fastener listed
in the operating instruction must be seen as one unit system in terms of safety.
Only the fuel cells and lubricants listed in the SPIT operating instruction may be
may be used (Item 7.2.1b).
For the maintenance of SPIT fastener driving tools, only spare parts specified by
the manufacturer or his authorized representative shall be used (Item 7.2.1e).
Safety instructions
GB
Not following the safety precautions may cause
injury to yourself or others. Strictly follow the
safety precautions.
Wear ear defenders.
Wear safety glasses.
Only use the tool for its intended use.
This is not a toy. Never point it at people.
Always assume that the tool is loaded.
Never transport the tool with your finger on the trigger.
Never place your hand over the nosepiece.
When servicing, remove the fuel cell, battery and nails from the magazine.
Warning: the contents of the fuel cell are flammable.
The fuel cell is under pressure. Protect it from temperatures above 50°C
(sunlight).
Do not open, puncture or burn the fuel cell.
Keep the fuel cell away from flames, sparks and heat. Do not spray near flames
or incandescent objects.
The fuel cell cannot be recharged. Do not attempt to fill or recycle it.
Place empty fuel cells in the bio-bag and send to SPIT After-Sales Service.
Keep tool, fuel cells and battery away from children.
Only use the tool in well-ventilated areas. Store the fuel cells in a well-ventilated
place.
For reasons of safety and operation, it is imperative that only SPIT-compatible
fuel cells and nails be used. SPIT does not license any other company to
manufacture fuel cells and nails and can only guarantee the quality and
performance of its own, genuine products. SPIT cannot accept responsibility for
damage or injury caused by the use of third party fuel cells and nails which are
not SPIT-compatible.
In particular, your product warranty will not cover damage
to the Pulsa 700 caused by non-compatible parts.
Do not use the PULSA 700 in rainy or excessively humid conditions.
IMPORTANT INFORMATION ABOUT SAFETY REQUIREMENTS
The European Standard EN 792-13 has established certain safety requirements
for hand-help non-electric fastener driving tools and it requires the respective
instructions to be part of the tool operating manual. In your own interest, we urge
you to follow such safety requirements without exception.
SPIT Fastener driving tools operated by internal combustion shall only be used
with dispensers for combustible gas which are listed in the SPIT operating
instruction (Item 7.2.5a). For the SPIT Pulsa tool, this means the use of SPIT
specified Pulsa Fuel Cells.
Only those fasteners listed in the SPIT operating instruction may be used in the SPIT
fastener driving tool (Item 7.2.1a). The fastener driving tool and the fastener listed
in the operating instruction must be seen as one unit system in terms of safety.
Only the fuel cells and lubricants listed in the SPIT operating instruction may be
may be used (Item 7.2.1b).
For the maintenance of SPIT fastener driving tools, only spare parts specified by
the manufacturer or his authorized representative shall be used (Item 7.2.1e).
Safety instructions
GB
Not following the safety precautions may cause
injury to yourself or others. Strictly follow the
safety precautions.
Wear ear defenders.
Wear safety glasses.
Only use the tool for its intended use.
This is not a toy. Never point it at people.
Always assume that the tool is loaded.
Never transport the tool with your finger on the trigger.
Never place your hand over the nosepiece.
When servicing, remove the fuel cell, battery and nails from the magazine.
Warning: the contents of the fuel cell are flammable.
The fuel cell is under pressure. Protect it from temperatures above 50°C
(sunlight).
Do not open, puncture or burn the fuel cell.
Keep the fuel cell away from flames, sparks and heat. Do not spray near flames
or incandescent objects.
The fuel cell cannot be recharged. Do not attempt to fill or recycle it.
Place empty fuel cells in the bio-bag and send to SPIT After-Sales Service.
Keep tool, fuel cells and battery away from children.
Only use the tool in well-ventilated areas. Store the fuel cells in a well-ventilated
place.
For reasons of safety and operation, it is imperative that only SPIT-compatible
fuel cells and nails be used. SPIT does not license any other company to
manufacture fuel cells and nails and can only guarantee the quality and
performance of its own, genuine products. SPIT cannot accept responsibility for
damage or injury caused by the use of third party fuel cells and nails which are
not SPIT-compatible.
In particular, your product warranty will not cover damage
to the Pulsa 700 caused by non-compatible parts.
Do not use the PULSA 700 in rainy or excessively humid conditions.
IMPORTANT INFORMATION ABOUT SAFETY REQUIREMENTS
The European Standard EN 792-13 has established certain safety requirements
for hand-help non-electric fastener driving tools and it requires the respective
instructions to be part of the tool operating manual. In your own interest, we urge
you to follow such safety requirements without exception.
SPIT Fastener driving tools operated by internal combustion shall only be used
with dispensers for combustible gas which are listed in the SPIT operating
instruction (Item 7.2.5a). For the SPIT Pulsa tool, this means the use of SPIT
specified Pulsa Fuel Cells.
Only those fasteners listed in the SPIT operating instruction may be used in the SPIT
fastener driving tool (Item 7.2.1a). The fastener driving tool and the fastener listed
in the operating instruction must be seen as one unit system in terms of safety.
Only the fuel cells and lubricants listed in the SPIT operating instruction may be
may be used (Item 7.2.1b).
For the maintenance of SPIT fastener driving tools, only spare parts specified by
the manufacturer or his authorized representative shall be used (Item 7.2.1e).
Safety instructions
GB
Not following the safety precautions may cause
injury to yourself or others. Strictly follow the
safety precautions.
Wear ear defenders.
Wear safety glasses.
Only use the tool for its intended use.
This is not a toy. Never point it at people.
Always assume that the tool is loaded.
Never transport the tool with your finger on the trigger.
Never place your hand over the nosepiece.
When servicing, remove the fuel cell, battery and nails from the magazine.
Warning: the contents of the fuel cell are flammable.
The fuel cell is under pressure. Protect it from temperatures above 50°C
(sunlight).
Do not open, puncture or burn the fuel cell.
Keep the fuel cell away from flames, sparks and heat. Do not spray near flames
or incandescent objects.
The fuel cell cannot be recharged. Do not attempt to fill or recycle it.
Place empty fuel cells in the bio-bag and send to SPIT After-Sales Service.
Keep tool, fuel cells and battery away from children.
Only use the tool in well-ventilated areas. Store the fuel cells in a well-ventilated
place.
For reasons of safety and operation, it is imperative that only SPIT-compatible
fuel cells and nails be used. SPIT does not license any other company to
manufacture fuel cells and nails and can only guarantee the quality and
performance of its own, genuine products. SPIT cannot accept responsibility for
damage or injury caused by the use of third party fuel cells and nails which are
not SPIT-compatible.
In particular, your product warranty will not cover damage
to the Pulsa 700 caused by non-compatible parts.
Do not use the PULSA 700 in rainy or excessively humid conditions.
IMPORTANT INFORMATION ABOUT SAFETY REQUIREMENTS
The European Standard EN 792-13 has established certain safety requirements
for hand-help non-electric fastener driving tools and it requires the respective
instructions to be part of the tool operating manual. In your own interest, we urge
you to follow such safety requirements without exception.
SPIT Fastener driving tools operated by internal combustion shall only be used
with dispensers for combustible gas which are listed in the SPIT operating
instruction (Item 7.2.5a). For the SPIT Pulsa tool, this means the use of SPIT
specified Pulsa Fuel Cells.
Only those fasteners listed in the SPIT operating instruction may be used in the SPIT
fastener driving tool (Item 7.2.1a). The fastener driving tool and the fastener listed
in the operating instruction must be seen as one unit system in terms of safety.
Only the fuel cells and lubricants listed in the SPIT operating instruction may be
may be used (Item 7.2.1b).
For the maintenance of SPIT fastener driving tools, only spare parts specified by
the manufacturer or his authorized representative shall be used (Item 7.2.1e).
Safety instructions
GB
Not following the safety precautions may cause
injury to yourself or others. Strictly follow the
safety precautions.
Wear ear defenders.
Wear safety glasses.
Only use the tool for its intended use.
This is not a toy. Never point it at people.
Always assume that the tool is loaded.
Never transport the tool with your finger on the trigger.
Never place your hand over the nosepiece.
When servicing, remove the fuel cell, battery and nails from the magazine.
Warning: the contents of the fuel cell are flammable.
The fuel cell is under pressure. Protect it from temperatures above 50°C
(sunlight).
Do not open, puncture or burn the fuel cell.
Keep the fuel cell away from flames, sparks and heat. Do not spray near flames
or incandescent objects.
The fuel cell cannot be recharged. Do not attempt to fill or recycle it.
Place empty fuel cells in the bio-bag and send to SPIT After-Sales Service.
Keep tool, fuel cells and battery away from children.
Only use the tool in well-ventilated areas. Store the fuel cells in a well-ventilated
place.
For reasons of safety and operation, it is imperative that only SPIT-compatible
fuel cells and nails be used. SPIT does not license any other company to
manufacture fuel cells and nails and can only guarantee the quality and
performance of its own, genuine products. SPIT cannot accept responsibility for
damage or injury caused by the use of third party fuel cells and nails which are
not SPIT-compatible.
In particular, your product warranty will not cover damage
to the Pulsa 700 caused by non-compatible parts.
Do not use the PULSA 700 in rainy or excessively humid conditions.
IMPORTANT INFORMATION ABOUT SAFETY REQUIREMENTS
The European Standard EN 792-13 has established certain safety requirements
for hand-help non-electric fastener driving tools and it requires the respective
instructions to be part of the tool operating manual. In your own interest, we urge
you to follow such safety requirements without exception.
SPIT Fastener driving tools operated by internal combustion shall only be used
with dispensers for combustible gas which are listed in the SPIT operating
instruction (Item 7.2.5a). For the SPIT Pulsa tool, this means the use of SPIT
specified Pulsa Fuel Cells.
Only those fasteners listed in the SPIT operating instruction may be used in the SPIT
fastener driving tool (Item 7.2.1a). The fastener driving tool and the fastener listed
in the operating instruction must be seen as one unit system in terms of safety.
Only the fuel cells and lubricants listed in the SPIT operating instruction may be
may be used (Item 7.2.1b).
For the maintenance of SPIT fastener driving tools, only spare parts specified by
the manufacturer or his authorized representative shall be used (Item 7.2.1e).
01