![background image](http://html.mh-extra.com/html/spectra/st10/st10_installing_1343362001.webp)
SUPPORT NOTES
This document is for informational purposes only and is not a legally binding agreement or offer Spectra Geospatial makes no warranties
and assumes no obligations or liabilities hereunder.
© 2019, Trimble Inc. All rights reserved. Spectra Geospatial is a Division of Trimble Inc. Spectra Geospatial and the Spectra Geospatial logo are trademarks of Trimble Inc. or its subsidiaries. All
other trademarks are the property of their respective owners. Microsoft, Windows, and Windows Location Services are either registered trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries. All other trademarks are the property of their respective owners.
www.spectrageospatial.com
Page 1
September 13, 2019
Spectra Geospatial Distributor Confidential
Spectra ST10
–
Installing Windows 10 v1809
Caution: Installing this operating system image will erase all software installed on the device,
and all data stored on the internal storage on the device.
To install the image of Windows
®
10 version 1809 on a Spectra
®
ST10 Tablet, the following
equipment is needed:
-
AC adapter with power cord
-
USB Hub and USB keyboard or Spectra ST10 Keyboard
-
USB flash drive (note: using a USB 3.1 flash drive will speed up the update process)
First, you must build an image installation USB flash drive then use it to install the image.
1. Prepare the USB flash drive. Make sure that:
a. The memory capacity is at least 11 GB.
b. It is FAT32 formatted; right-click the USB Drive name in the File Explorer and
click Format. The File system should be set to FAT32