![background image](http://html1.mh-extra.com/html/oaxis/myfirst-sketch-pro/myfirst-sketch-pro_user-manual_3127658001.webp)
Get to
know myFirst
Sketch Pro
USER MANUAL
Pull out the writing stylus from the top
right of the Sketch Pro, write with the
pen or any hard but not sharp subject in
the writing surface.
Press the Partial Erase button, rub with the
silicone part on the pen. The partial erasing
will last for 30 seconds. The Erase-All
button will not work during this period.
Press the Return button once, back to
regular writing status.
In the writing status, press the Erase-All
button to clear all the drawings at once.
Warning
�
Do not store in high humidity environment
�
Avoid open flames
�
Use provided stylus to sketch. Do not apply pressure on screen with pointed objects
�
In case of liquid leakage, wear gloves and place the product in a sealed bag. If
liquid comes into contact with the skin, wash it thoroughly with soap and water.
If irritation occurs, seek professional treatment immediately.
�
Do not dismantle the device. Contact our service department for technical help.
FOR ONLINE HELP AND SUPPORT, VISIT
https://support.oaxis.com
Switch to Lock to prevent accidentally
erase the full content.
To replace the battery, unscrew the screw,
and pull out the battery compartment.
Replace with the same type of battery.