1641 LCD KEYPAD V1.0 (RUSSIAN / LITHUANIAN) - INSTALLER’S GUIDE
The
1641 LCD Keypad
includes a programmable 32-character LCD screen, zone input and a PGM output as well as supporting the use of
the
Paradox Memory Key
. All of the LCD key pad’s f eatures and options can only be accessed through the keypad’s programming mode.
During the key pad’s power up, press and hold the [
CLEAR
] key
to set the LCD screen and the Key pad Code to def ault.
Entering Keypad Program ming Mode
STEP 1:
Press and hold the
[0]
key f or two seconds.
STEP 2:
Enter the [
KEYPAD CODE
].
Default:000000
STEP 3:
Press the key corresponding to the desired option or use the arrow keys to
scroll through the av ailable options and press [
ENTER
].
[1]
= Labels
[4]
= Key pad PGM
[2]
= Options
[5]
= Read Key
[3]
= Key pad Code
[6]
= Write Key
[1] Labels
This f eature allows y ou to program some of the messages that appear on the key pad’s LCD screen. In step 3 of “Entering Keypad
Programming Mode” described in the shaded box abov e, select option
[1]
. The keypad will prompt you to enter a 3-digit section. Each
section f rom
[101]
to
[135]
represents a specif ic message. Enter the 3-digit section that corresponds to the message you wish to change.
[101]
-
[116]
= Zone 1 to Zone 16
[133]
= Partition 1
[134]
= Partition 2
[135]
= Key pad Name (def ault: “Spectra Family ”)
Table 1: Character Reference
[UC] Mode
[LC] Mode
[SP] Mode
KEY
X1 X2 X3 X4 X1 X2 X3 X4 X1 X2 X3 X4
[1]
A
Б
B
Г
A B
C
1 a
б
в
г
[2]
Д
Е
Ё
Ж
D E F 2
д
е
ё
ж
[3]
З
И
Й
К
G H I 3
з
и
й
к
[4]
Л
М
Н
О
J K L 4
л
м
н
о
[5]
П
Р
С
Т
M N O 5
п
р
с
т
[6]
У
Ф
Х
Ц
P Q
R 6
у
ф
х
ц
[7]
Ч
Ш
Щ
Ъ
S T
U
7
ч
ш
щ
ъ
[8]
Ы
Ь
Э
Ю
V W
X 8
ы
ь
э
ю
[9]
Я
! & ,
Y Z . 9
я
#
↑
↓
[0]
SPACE ' :
/
+ - = 0 ( ) < >
[2] Options
In step 3 of “Entering Key pad Programming Mode”, select option
[2]
. Y ou will now be able to enable or disable the keypad’s options as
shown in table 2. Press the corresponding key s until all desired options are set, and then press [
ENTER
].
Table 2: Keypad Options
Key Description
OFF ON
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
Keypad Zoning Sending
Keypad Zone Requires 1k Ohm EOL Resistor
Keypad Zone Set to
On-Board Keypad Tamper Supervision
Status LED Follows Arming Status of
Multiple Zone Display (status of several zones on one screen without zone label)
Scrolling Zone Display (each screen displays zone label and status of one zone)
For Future Use
Disabled
NO
(default)
Keypad Zone 1
(default)
Disabled
(default)
Partition 1
(default)
Disabled
(default)
Disabled
(only if
[6]
=ON)
N/A
Enabled
(default)
Yes
Keypad Zone 2
Enabled
Partition 2
Enabled
Enabled
(default)
N/A
Indicates current character sty le.
Press the
[FNC2]
key to change
between [UC], [LC] and [SP]. See Table 1.
tab
[101] TEXT {UC}
ZONE ONE
Cursor indicates the selected character. Press the [
T
] or [
S
] key s to scroll the
characters. Press the numerical key s f rom [0] to [9] to replace the selected
character. Ref er to table 1.
