Messages on the LCD
screen will guide you
through the operations
Use arrow buttons to
scroll menu or choices
ON
= AC power
OFF
= Power failure
Green:
ON
= Zones closed
OFF
= Zone(s) open
FLASH
= Exit Delay
Red:
ON
= System armed
FLASH
= Stay Armed
FAST FLASH
= Alarm
User’s Quick
Reference Guide
AC LIGHT
STATUS LIGHT
ACCESS CODES
To
Stay Arm
(Arms Area’s perimeter)
To
Force Arm
(Arms Area without waiting for all
zones to close)
To
Regular Arm
(Arms entire Area)
To
Instant Arm
(Stay Arms Area, but if any armed zones are
breached, it will instantly cause an alarm)
To
Disarm:
enter your
[
ACCESS CODE
]
To arm
when leaving:
To arm
when staying:
ARMING AND DISARMING
*
If needed, press button(s) corresponding to desired partition(s).
1641
PRINTED IN CANADA 02/00 1641EQ-00
Enter your
[
ACCESS CODE
]
*
+ Enter your
[
ACCESS CODE
]
*
+ Enter your
[
ACCESS CODE
]
*
for 3 seconds
Stay Arm + press
One-touch Button,
?
if enabled:
One-touch Button,
?
if enabled:
One-touch Button,
?
if enabled:
1) Press
2) Enter your
[
MASTER CODE
]
3) Enter three-digit section
(see Table)
4) Enter new 4- or 6-digit
[
CODE
]
1) Repeat steps 1 to 3
3) Press
Press
2)
for each digit in the code
To program Access Codes:
To delete Access Codes:
Section:
Codes:
[001]
System Master Code
[002]
Master Code 1
[003]
Master Code 2
[004] to [047] User codes 004 to 047
[048]
Duress or User code 048
Web site: www.paradox.ca
Security Company:
during the exit delay.
to exit
5) Press
to exit
Press & hold a button for
3 seconds
without entering your Access Code.
The installer must enable each One-touch Button.
ONE-TOUCH BUTTONS
To Regular Arm:
To Stay Arm:
To Force Arm:
To Bypass:
Press
Press
Press
Press
FAST EXIT
When the system is
already
Stay
Armed, press and hold the button for
3 seconds to start the Exit Delay.
Press & hold:
: Stay Armed after Exit Delay
: Force Armed after Exit Delay
: Regular Armed after Exit Delay
