nROADS Beacon 05.16
1.
1.800.338.7337 / www.soundoffsignal.com
!
WARNING
This product contains high intensity LED devices. To
prevent eye damage, DO NOT stare into the light
beam at close range.
NOTICE:
Installers and users must comply with all applicable federal, state and local laws regarding use and installation of warning devices.
Improper use or installation may void warranty coverage. To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at
www.soundoffsignal.com/sales-support. If you have questions regarding this product, contact Technical Services, Monday - Friday, 8 a.m. to 5 p.m. or after hours 5 p.m. to 8 p.m. EST
at
1.800338.7337 (press #4 to skip the automated message). Questions or comments that do not require immediate attention may be emailed to [email protected].
SUPERIOR CUSTOMER RELATIONSHIPS. SMARTLY DESIGNED LIGHTING & ELECTRONIC SOLUTIONS.
•HIGH CURRENT interconnects must be properly terminated. Poor crimp quality can cause heat
build-up and fire. Follow crimp connector manufacturer instructions.
•DO NOT install this product or route any wires in the Air Bag Deployment Zone. Refer to vehicle
Owner’s Manual for deployment zones.
•Do NOT use system to disconnect headlights, brake lights or other safety equipment.
•Unit may become hot to touch during normal operation.
•Failure to properly install connectors, fuses or wiring may cause vehicle failure or fire.
•Installation must only be performed by trained technician. Installer must determine vehicle wiring
configuration and proper integration of system.
•Use proper wire gauge. All power wires connecting to positive (+) or negative (-) battery terminal
or local chassis ground (-) must be sized to supply at least 125% of max. current and properly fused at
power source.
•Install protective grommets when routing wire through firewall or metal.
WARNING
CURRENT CONSUMPTION
MODULE
CONFIGURATION
INPUT VOLTAGE
RANGE
CURRENT DRAW
(MAXIMUM)
WATTS FLASHING
@ 12.8Vdc
3 LED Single Color
9-17.5Vdc
0.5 Amps
3.2 Watts
6 LED Single Color
9-17.5Vdc
1.0 Amps
6.4 Watts
9 LED Single Color
9-17.5Vdc
1.5 Amps
9.6 Watts
12 LED Single Color
9-17.5Vdc
2.0 Amps
12.8 Watts
12 LED Dual Color
9-17.5Vdc
1.0 Amps
6.4 Watts
18 LED Tri Color
9-17.5Vdc
1.0 Amps
6.4 Watts
TECHNICAL SPECIFICATIONS
Dimensions:
Input Voltage:
9-17.5Vdc
Standby Current:
<0.0001 Amps after 10 seconds of no
active control inputs
Reverse Polarity Protection:
Yes
Electrical Transient Protection:
ISO7637-2 for 12V systems
Wiring:
Approx. 18" length. Type TXL 4x 16AWG
Power/Ground, 6x 20AWG Control
Please see pages 2-3 for Mounting Instructions
HIGH DOME BEACON
HIGH DOME
MAGNET MOUNT
-
ENRBCSHM(x)1(x)Z(xxx)
COMBO: FLAT/PIPE MOUNT - ENRBCSHC(x)1(x)Z(xxx)
LOW DOME
MAGNET MOUNT
-
ENRBCSLM(x)1(x)Z(xx)
COMBO: FLAT/PIPE MOUNT - ENRBCSLC(x)1(x)Z(xxx)
Distributed by
