background image

 

WARNING

CLASS 1 LASER PRODUCT

This product contains a low power laser device.

CLASS 1 LASER PRODUCT

APPAREIL Á LASER DE CLASSE 1

PRODUCTO LASER DE CLASE 1

CAUTION

INVISIBLE LASER RADIATION

WHEN OPEN AND INTERLOCKS

DEFEATED.

AVOID EXPOSURE TO BEAM

 

PRECAUTIONS

Follow the advice below for safe and appropriate operations.

ON PLACEMENT

• 

Do not use the unit in places which are extremely hot, cold, dusty, or humid.

• 

Place the unit on a flat and even surface.

• 

Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a cloth,  

 

 

or by placing it on a carpet.

ON SAFETY

• 

When connecting and disconnecting the AC cord, grip the plug and not the cord itself. Pulling the cord may damage it  

 

and create hazard.

• 

When you are not going to use the unit for a long period of time, disconnect the AC power cord.

ON AC VOLTAGE

• 

Before use, check that the rated voltage of your unit matches your local voltage.

ON CONDENSATION

• 

When left in a heated room where it is warm and damp, water droplets or condensation may form inside the 

 

CD player.

• 

When there is condensation inside the unit, the unit may not function normally.

• 

Let it stand for 1 to 2 hours before turning the power on, or gradually heat the room up and dry the unit before use.

Ensure a minimum distance of 5 cm around the apparatus for sufficient ventilation.

Ensure that the ventilation is not impeded by covering the ventilation openings with items, 

 

such as newspapers, table-cloths, curtains, etc..

Do not place naked flame sources, such as lighted candles on the apparatus.

Take attention to the environmental aspects of battery disposal.

Use the apparatus only in moderate climates (not in tropical climates).

Do not expose the apparatus to dripping or splashing.

Do not place objects filled with liquids, such as vases, on the apparatus.

Should any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel.

Warning:   Do not touch the lens.

 

DO NOT THROW BATTERIES IN FIRE !

In case of misfunction due to electrostatic discharge the apparatus has to be reset by disconnecting it from mains supply.

THE MARKING PLATE IS LOCATED AT THE BACK OF ENCLOSURE OF THE APPARATUS.

ATTENTION  :   

To  reduce  the  risk 

of  electric  shock,  do  not  remove  the 

cover. There are no user serviceable 

parts inside the unit. Refer all servicing 

to qualified personnel.

The  exclamation  point  within 

the triangle is a warning sign 

alerting the user of important 

instructions  accompanying 

the product.

The  lightening  flash 

with  arrowhead  symbol 

within  the  triangle  is  a 

warning  sign  alerting 

the  user  of  "dangerous 

voltage"  inside  the  unit.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Summary of Contents for SCD5405








Reviews: