XDR-S60DBP [GB]
4-463-181-
12
(1)
DIGITAL RADIO
DAB/FM
Operating Instructions GB
4-463-181-
12
(1)
XDR-S60DBP
©2013 Sony Corporation Printed in China
To make a new station list
If you have moved to another region, or when the radio is reset, perform the auto tune
again.
Select DAB or FM*, then press AUTO TUNE.
Select “OK” to start
the auto tune
process.
* Only when the tuning mode is set to “By Station List.” When AUTO TUNE is pressed in “Manual
Tune” mode, scan tuning will start instead. See “FM Tune Mode” in “Setup Menu Options” for
details.
The radio receives the
first station in the new
station list.
The radio receives the
first station in the new
station list.
Tips on receiving FM station names
•
FM station names will be received and stored in the radio while you are listening to the
broadcasts, even if you have not received them during the auto tune process.
•
FM station names may not be transmitted, depending on the station.
Notes
•
The currently stored station list will be cleared once the auto tune process has started.
•
When the setup menu is displayed, auto tune is not performed even when AUTO TUNE is
pressed.
Getting Started
Listening to the Radio
Listening to the Audio from an External Device
1
Connect the radio to the mains and extend the antenna.
1
Turn on the radio.
1
Tune to the station you want.
Follow steps 1 to 3 in “Listening to the Radio”
above.
1
Select the band (DAB or FM).
2
Turn on the radio.
1
Connect the external device to the
radio.
3
Select a desired station or service.
Turn the control dial to make a selection, then
press the dial.
3
Select “Now” or “Later” to complete the auto tune.
2
Turn on the radio.
2
Select the band (DAB or FM).
2
Press and hold the desired preset button (1 – 5) until
“Stored to [PRESET x].” appears on the display.
2
Press the desired preset button (1 – 5).
3
Select AUDIO IN.
3
Repeat steps 1 and 2 to preset
another station.
Changing a preset station
1
Tune to a new station.
2
Press and hold the preset button you
want to change until “Stored to
[PRESET x].” appears on the display.
The preset station on the selected
button will be replaced by the new one.
Tip
The preset stations remain in the radio’s
memory even after an auto tune is performed.
4
Start playing your selection on
the connected device.
Notes
•
When AUDIO IN is selected, the radio turns
off automatically after about 20 minutes if
there is no audio signal input.
•
When the sound source from the AUDIO IN
jack is originally stereo, the left and right
stereo channels are mixed and the speaker
output will be in monaural.
To listen through headphones
Connect headphones that have a stereo or
monaural* mini plug (not supplied).
To
(headphones)
* When listening to stereo sound using monaural
headphones, you will hear sound from the left channel
only.
To use the radio on batteries
Press down on the battery
compartment cover at
and
slide it in the direction of the
arrow
.
Insert the
side of the
battery first.
To close the cover, slide it in the direction of the arrow
until it clicks
into place.
Tip
“
” appears on the display when the radio is powered by the batteries.
Presetting stations
Preset favourite stations to the 5 preset buttons. You can preset both a DAB and FM station
for each of the 5 buttons.
If it is the first time the radio is turned on, auto tune is performed automatically.
You can choose whether to
receive FM station names
now or later.
Tips
•
To perform auto tune again later, see “To make a new station list” below.
•
You may choose to receive FM station names later, since the process may take a long
time depending on the number of stations. See “Setup Menu Options” for details on how
to receive FM station names.
[MENU]
Edit FM Station List
Get FM Station Name
Listening to a preset station
After auto tune is
completed, the radio
receives the first station in
the DAB station list stored
by auto tune.
See “Setup Menu Options” for manual tuning.
Audio
connection cable
(not supplied)
To AUDIO IN
Portable
digital music
player, etc.
Three LR14 (size C)
batteries (not
supplied)
To adjust the volume
AC adaptor
(supplied)
To DC IN
Press BACK to cancel the
auto tune process while
in progress.
Turn the control dial (
)
to make a selection, then
press the dial (
).
Press BACK to exit
the station list.
Station currently
being received
Secondary service
(after the “L” mark)
Selected
station
Scrolling text
(DLS: Dynamic Label Segment of
up to 128 characters)
Station currently
being received
Station name*
Selected
station
* Displayed only when RDS data has been received.
Station name*
Scrolling text
(RT: Radio Text of up to 64 characters)*
“SC” lights up when
a secondary service
is received.
Note
To prevent the preset
from being changed by
mistake, do not hold the
preset button down.
Example: Presetting a DAB station to the
preset button “1”
Example: When the preset button “1” is
pressed
