background image

1

Read this first

Read this first

Notice

© 2004 Sony Corporation. All rights reserved.

This manual and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any machine-
readable form without prior written approval.

Sony Corporation provides no warranty with regard to this manual, the software, or other information contained herein and hereby 
expressly disclaims any implied warranties or merchantability or fitness for any particular purpose with regard to this manual, the 
software or such other information. In no event shall Sony Corporation be liable for any incidental, consequential, or special damages, 
whether based on tort, contract, or otherwise, arising out of or in connection with this manual, the software, or other information 
contained herein or the use thereof.

In the manual, the ™ or ® marks are not specified.

Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without 
notice. The software described herein is governed by the terms of a separate user licence agreement.

Please note that the illustrations in this manual may not necessarily apply to your model. Please see the Specifications sheet 
for the specific configuration of your VAIO computer.

Summary of Contents for VGN-U750P VAIO















































































































































Reviews: