background image

SERVICE MANUAL

Sony Corporation

Published by Sony Techno Create Corporation

HT-CT380/CT381

SA-CT380/CT381

SPECIFICATIONS

HT-CT380/CT381

SOUND BAR

SA-CT380/CT381

ACTIVE SPEAKER SYSTEM

9-896-145-02

2015D33-1

© 

2015.04

US Model

Canadian Model

E Model

Australian Model

PX Model

HT-CT380/SA-CT380

AEP Model

UK Model

HT-CT380/CT381/SA-CT380/CT381

Ver. 1.1  2015.04

•  All of the units included in the HT-

CT380/CT381 (SA-CT380/CT381, 
SA-WCT380/WCT381, Remote con-
trol) are required to con

fi

 rming opera-

tion of SA-CT380/CT381. Check in 
advance that you have all of the units.

COMPONENT  MODEL  NAME

HT-CT380

HT-CT381

Bar Speaker (Active Speaker System)

SA-CT380

SA-CT381

Subwoofer (Active Subwoofer)

SA-WCT380

SA-WCT381

Amplifier section

U.S. models:

POWER OUTPUT AND TOTAL HARMONIC 
DISTORTION:
(FTC)

Front L + Front R:
With 4 ohms loads, both channels 
driven, from 200 Hz - 20,000 Hz; rated 
35 Watts per channel minimum RMS 
power, with no more than 1% total 
harmonic distortion from 
250 milliwatts to rated output.

POWER OUTPUT (reference)

Front L/Front R: 100 Watts (per 
channel at 4 ohms, 1 kHz)

Other models:

POWER OUTPUT (rated)

Front L + Front R:
50 W + 50 W (at 4 ohms, 1 kHz, 1% 
THD)

POWER OUTPUT (reference)

Front L/Front R: 100 Watts (per 
channel at 4 ohms, 1 kHz)

Inputs

HDMI IN* 1/2/3
ANALOG IN
DIGITAL IN (TV)

Outputs

HDMI OUT (ARC)

HDMI Section

Connector

Type A (19pin)

BLUETOOTH section

Communication system

BLUETOOTH Specification version 3.0

Output

BLUETOOTH Specification Power Class 
2

Maximum communication range

Line of sight approx. 10 m (33 ft)

1)

Maximum number of devices to be 

registered
9 devices

Frequency band

2.4 GHz band (2.4000 GHz - 
2.4835 GHz)

Modulation method

FHSS (Freq Hopping Spread Spectrum)

Compatible BLUETOOTH profiles

2)

A2DP 1.2 (Advanced Audio Distribution 
Profile)
AVRCP 1.3 (Audio Video Remote 
Control Profile)

Supported Codecs

3)

SBC

4)

, AAC

5)

Transmission range (A2DP)

20 Hz - 20,000 Hz (Sampling frequency 
44.1 kHz)

1)

The actual range will vary depending on 
factors such as obstacles between 
devices, magnetic fields around a 
microwave oven, static electricity, 
cordless phone, reception sensitivity, 
operating system, software application, 
etc.

2)

BLUETOOTH standard profiles indicate 
the purpose of BLUETOOTH 
communication between devices.

3)

Codec: Audio signal compression and 
conversion format

4)

Subband Codec

5)

Advanced Audio Coding

Front L/Front R speaker section

Speaker system

Full range speaker system, 
Acoustic suspension

Speaker

General

Power requirements

120 V AC, 60 Hz (US and Canadian models)
110 V - 240 V AC, 50 Hz/60 Hz (PX model)
220 V - 240 V AC, 50 Hz/60 Hz (Other models)

Power consumption

Dimensions (approx.) (w/h/d)

Mass (approx.)

2.4 kg (5 lb 4 

5

/

8

oz)

Supplied accessories

Remote control (1)
R03 (size AAA) batteries (2)
Optical digital cable (1)
Wall mounting brackets (2) and screws (2)
Speaker pads for the subwoofer (4)
Startup Guide (1)
Operating Instructions (1)

Speaker system

Wireless Sound Specification version 
2.0

Frequency band

2.4 GHz (2.4000 GHz - 2.4835 GHz)

Modulation method

Pi / 4 DQPSK

Design and specifications are subject to 
change without notice.

Wireless transmitter section 

* The 1, 2, and 3 jacks are 

identical. Using any of them makes no 
difference.

900 mm × 51 mm × 117 mm (35

1

/

2

in × 

2

1

/

8

in × 4

5

/

8

in) (without wall 

mounting brackets)
900 mm × 120 mm × 72 mm (35

1

/

2

in × 

4

3

/

4

in × 2

7

/

8

in) (with wall mounting 

brackets)

60 mm (2 

3

/

8

 in) cone type

On: 37 W
Standby: 0.3 W or less
(at the Power saving mode)
Standby: 0.5 W or less
(When [S. THRU] is [ON]: 6 W or less)

•  Please refer to service manual separately issued for Subwoofer.

Note:

Be sure to keep your PC used for service and 
checking of this unit always updated with the 
latest version of your anti-virus software.
In case a virus affected unit was found during 
service, contact your Service Headquarters. 

Photo: SA-CT380

Summary of Contents for HT-CT380









































































Reviews: