background image

SERVICE MANUAL

Sony Corporation

Published by Sony EMCS (Malaysia) PG Tec

HCD-GTK1i/GTK2i

HOME AUDIO DOCKING SYSTEM

9-890-546-02

2010L08-1

© 

2010.12

US Model

Canadian Model

Australian Model

HCD-GTK1i

E Model

HCD-GTK1i/GTK2i

Ver. 1.1  2010.12

•  HCD-GTK1i is the tuner, USB and iPod section in FST-GTK1i and RDH-GTK1i.
•  HCD-GTK2i is the tuner, USB and iPod section in FST-GTK2i.

SPECIFICATIONS

– Continued on next page –

Photo: HCD-GTK2i

AUDIO POWER SPECIFICATIONS

POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:

RDH-GTK1i US model only

With 6-ohm loads, both channels driven,
from 120 Hz – 10 kHz; rated 30 watts per
channel minimum RMS power, with no
more than 0.7% total harmonic distortion
from 250 miliwatts to rated output.

Ampli

fi

 er section

FST-GTK2i

The following are measured at
  AC 127 V, 60 Hz

Front speaker:
Power Output (rated)
  35 W + 35 W (at 6 

, 1 kHz, 1% THD)

RMS output power (reference)
  110 W + 110 W (per channel at 6 

, 1 kHz)

Subwoofer:
RMS output power (reference)
 230 W (8 

, 100 Hz)

FST-GTK1i and RDH-GTK1i

North American model only

The following are measured at
  AC 120 V, 60 Hz

Front speaker:
RMS output power (reference)
  110 W + 110 W (per channel at 6 

, 1 kHz)

Other models

The following are measured at
Mexican model:
  AC 127 V, 60 Hz
Other models:
  AC 120, 220, 240 V, 50/60 Hz

Front speaker:
Power Output (rated)
  35 W + 35 W (at 6 

, 1 kHz, 1% THD)

RMS output power (reference)
  110 W + 110 W (per channel at 6 

, 1 kHz)

Input

AUDIO IN L/R:
  Voltage 1 V, impedance 47 kilohms

Output

SUBWOOFER OUT (FST-GTK2i only)

Tuner section

FM stereo, FM/AM superheterodyne tuner
Antenna:
  FM lead antenna
  AM loop antenna

FM tuner section

Tuning range
 North American model:
  87.5 MHz – 108.0 MHz (100 kHz step)
 Other models:
  87.5 MHz – 108.0 MHz (50 kHz step)
Intermediate frequency
 225 kHz

AM tuner section

Tuning range
  Pan American and Oceanian models:
  530 kHz – 1,710 kHz (with 10 kHz tuning interval)
  531 kHz – 1,710 kHz (with 9 kHz tuning interval)
 Other models:
  530 kHz – 1,610 kHz (with 10 kHz tuning interval)
  531 kHz – 1,602 kHz (with 9 kHz tuning interval)
Intermediate frequency
 53 kHz

USB section

Supported bit rate*
  MP3 (MPEG 1 Audio Layer-3):
  32 kbps – 320 kbps, VBR
  WMA: 48 kbps – 192 kbps
  AAC: 48 kbps – 320 kbps
  * Compatibility with all encoding/
    writing software, recording devices
    and recording media cannot be guarantee.

Sampling frequencies
  MP3 (MPEG 1 Audio Layer-3):
  32 kHz/44.1 kHz/48 kHz
  WMA: 44.1 kHz
  AAC: 44.1 kHz
Transfer speed
 Full-speed
Supported USB device
  Mass Storage Class
Maximum current
 500 mA

iPod section

DC5V 500 mA MAX

Speakers

Unit
HCD-GTK2i (for FST-GTK2i)/
FST-GTK1i/RDH-GTK1i 

Speaker system
 2-way, coaxial
Speaker unit
  Woofer: 160 mm (6 1/2 in), cone type
  Tweeter: 40 mm (1 5/8 in), cone type
Rated impedance
 6 ohms

Summary of Contents for HCD-GTK1i









































Reviews: