Built for your ears – and your iPod®
1
. The DR-V150iP Studio Monitor Series headset
incorporates high-end materials, advanced engineering, and built-in control for iPod®
1
and iPhone®. The in-line remote control and microphone let you navigate your music
library with ease or take calls without taking your iPhone® out of your pocket.
In-line remote control and microphone
Use the in-line remote control and microphone to navigate your iPod® library
1
or talk on your iPhone® without
ever taking your player out of your pocket.
Differences in details
30mm drivers deliver deeper bass, lower distortion and wider dynamic range. Bass response extends down to
18Hz. Built to handle power, these headphones hold up to high-output levels.
Left or right – you choose
Reversible earcups enable single-sided monitoring flexibility
Better sound through better design
The ergonomic, supra-aural design rests lightly on the ears, positioning the driver the correct distance from the
ear canal and creating a controlled environment for better sound.
Ample sound, minimum noise
Ferrite magnets provide high energy and compact size while producing (98 dB/mW sensitivity), and oxygen-free
copper cord produces maximum conductivity and minimal noise.
Stay comfortable as long as you listen
A wide, molded headband distributes the headphone's weight over a wide area, reducing pressure and
improving comfort in even the longest listening sessions.
Specifications
Audio
Driver Unit
30 mm, dome type (CCAW)
Frequency Response
16 - 22,000 Hz
Impedance
24 ohms at 1 kHz
Sensitivity (db)
98 dB/mW
Volume Control
Yes
Convenience
Remote Control Functions
Volume, FF, RW, Play, Pause, Mic
General
Magnet
Neodymium
Plug
Four-conductor gold-plated stereo mini plug for iPod and iPhone with remote function
Power Handling Capacity
500mW (IEC)
Hardware
Cord
47 1/4 in. (1.2 m) Litz cord, Y-Type
Microphone
Yes
Inputs and Outputs
DR-V150IP
