background image

SERVICE MANUAL

Sony Corporation

Published by Sony Techno Create Corporation

(MEX-N6050BT)

(MEX-GS610BT only)

(MEX-GS610BT only)

FOR THE CUSTOMERS IN THE USA. NOT 
APPLICABLE IN CANADA, INCLUDING IN THE 
PROVINCE OF QUEBEC.

POUR LES CLIENTS AUX ÉTATS-UNIS. NON 
APPLICABLE AU CANADA, Y COMPRIS LA 
PROVINCE DE QUÉBEC.

AUDIO POWER SPECIFICATIONS

CEA2006 Standard
Power Output: 17 Watts RMS × 4 at 4
Ohms < 1% THD+N
SN Ratio: 80 dBA 
(reference: 1 Watt into 4 Ohms)

Tuner section

FM

Tuning range: 87.5 – 107.9 MHz
Antenna (aerial) terminal: 

External antenna (aerial) connector

Intermediate frequency: 25 kHz
Usable sensitivity: 8 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 80 dB (stereo)
Separation: 50 dB at 1 kHz
Frequency response: 20 – 15,000 Hz

AM

Tuning range: 530 – 1,710 kHz
Antenna (aerial) terminal: 

External antenna (aerial) connector

Intermediate frequency: 

9,115 kHz or 9,125 kHz/5 kHz

Sensitivity: 26 μV

(

MEX-GS610BT

)

(MEX-GS610BE)

FM

Antenna (aerial) terminal: 

External antenna (aerial) connector

Intermediate frequency: 25 kHz

Usable sensitivity: 8 dBf

Selectivity: 75 dB at 400 kHz

Signal-to-noise ratio: 80 dB (stereo)

Separation: 50 dB at 1 kHz

Frequency response: 20 – 15,000 Hz

MW/LW

Tuning range:

MW: 531 – 1,602 kHz
LW: 153 – 279 kHz

Antenna (aerial) terminal: 

External antenna (aerial) connector

Intermediate frequency: 

Sensitivity: MW: 26 μV, LW: 45 μV  

9,124.5 kHz or 9,115.5 kHz/4.5 kHz

FM1/FM2: 87.5 – 108.0 MHz 

(at 50 kHz step)

FM3: 65 – 74 MHz (at 30kHz step)

Tuning range: 

CD Player section

Signal-to-noise ratio: 120 dB
Frequency response: 10 – 20,000 Hz
Wow and flutter: Below measurable limit
Corresponding codec: MP3 (.mp3) and WMA (.wma)

USB Player section

Interface: USB (High-speed)
Maximum current: 1 A (front), 2.1 A (rear)
The maximum number of recognizable tracks: 

10,000

Corresponding codec: 

MP3 (.mp3), WMA (.wma) and WAV (.wav)

FM

Tuning range:

87.5 – 108.0 MHz (at 50 kHz step)
87.5 – 108.0 MHz (at 100 kHz step)
87.5 – 107.9 MHz (at 200 kHz step)

FM tuning step:

50 kHz/100 kHz/200 kHz switchable

Antenna (aerial) terminal: 

External antenna (aerial) connector

Intermediate frequency: 25 kHz
Usable sensitivity: 8 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 80 dB (stereo)
Separation: 50 dB at 1 kHz
Frequency response: 20 – 15,000 Hz

AM

Tuning range:

531 – 1,602 kHz (at 9 kHz step)
530 – 1,710 kHz (at 10 kHz step)

AM tuning step: 

9 kHz/10 kHz switchable

Antenna (aerial) terminal: 

External antenna (aerial) connector

Intermediate frequency: 

9,124.5 kHz or 9,115.5 kHz/4.5 kHz (at 9 kHz step)
9,115 kHz or 9,125 kHz/5 kHz (at 10 kHz step)

Sensitivity: 26 μV

MEX-GS610BE/GS610BT/

N6050BT

SPECIFICATIONS

9-893-930-02

2014D33-1

© 

2014.04

US Model

Canadian Model

MEX-GS610BT

E Model

MEX-N6050BT

Russian Model

MEX-GS610BE

Ver. 1.1  2014.04

Model Name Using Similar Mechanism

CDX-G3000UE/G3000UP/
G3050UV

Mechanism Type

MG-101CF-188

Optical Pick-up Name

DAX-25A

•  The tuner and CD sections have no adjustments.

 AUDIO SYSTEM

The service manual of the mechanism deck, used in 
this model, has been issued in a separate volume. 
Please refer to the service manual of the MG-101 
series for the mechanism deck information.

– Continued on next page –

Photo: MEX-GS610BT

Summary of Contents for CDX-G3000UE













































































Reviews: