background image

TEMPO

 ATA

100

Macintosh

®

 PCI Host Adapter Card

Quick Start Guide for Tempo ATA100

You Should Have

The following items should be included in your product package:

•  One Tempo ATA100 Macintosh PCI Host Adapter
• One Ultra ATA Cable (supporting two internal hard drives)
• Eight screws (for mounting hard drives)
• One Tempo AV Tool Diskette

The following items may be required for installation:

• Medium Phillips screwdriver
• Small flat blade screwdriver 
• Needle nose pliers
•   Drive mounting brackets/carriers or drive mounting sleds (sold 

separately)

• One additional Ultra ATA Cable (sold separately)
• One or more power cable Y-adapters (sold separately)

System Requirements

The Tempo ATA100 requires the following in order to operate 
in your system:

• One available PCI slot
• One or more hard drives (depending on confi guration)
• One or more available hard drive bays (depending on confi guration)
• Mac

®

 OS 8.0 through OS X Version 10.2.x

 

 Support Notes:

 We recommend that you make a backup of important 

information on your system’s current hard drive prior to installing new 

hardware or software. 

When handling computer products, you must take care to prevent components 
from being damaged by static electricity. Before opening your computer or 
removing parts from their packages, always ground yourself first by touching 
a metal part of the computer, such as a port access cover, and work in an area 
free of static electricity; avoid carpeted areas. Handle all electronic components 
only by their edges, and avoid touching connector traces and component pins.

Remember to register your product online at http://registration.sonnettech.com to be informed of future upgrades and product releases.

Software updates and links are available from the Sonnet web site at www.sonnettech.com. • Online support form available at http://supportform.sonnettech.com.

Sonnet Technologies Customer Service hours are Mon.-Fri., 7 a.m.–5 p.m. Pacific Time • Customer Service Phone: 1-949-472-2772 • E-mail: [email protected]

Sonnet Technologies, Inc., Irvine, California USA • Tel: 1-949-587-3500 Fax: 1-949-457-6350 

©2001 Sonnet Technologies, Inc.  Revised 2003. All rights reserved. Sonnet, the Sonnet logotype, Simply Fast, the Simply Fast logotype, and Tempo are trademarks of Sonnet Technologies, Inc. Tempo ATA100 includes technol-
ogy by FirmTek, LLC. Macintosh and Mac are trademarks of Apple Computer, Inc., registered in the United States and other countries. Other product names are trademarks of their respective owners. Product specifications 
subject to change without notice. Printed in the USA.  QS-TAT-100-E-071503

Summary of Contents for TEMPO ATA100







Reviews: