ICE MAKER
SK-289S /SK-289H /SK-289U
PRODUCT MODEL NUMBER
A
115 Volt, 60 Hz., AC
only,
15-
or
20-amp
electrical supply, properly grounded in accordance with the National
Electrical Code and local codes and ordinances, is required.
It is recommended that a separate circuit, serving only your ice maker, be provided. Use areceptacle which cannot be
turned off by a switch or pull by chain.
ELECTRICAL
A cold water supply with water pressure between
0.13 Mpa
[
19 psi
] and
0.55 Mpa
[
80 psi
] is required to operate ice
maker. If you have questions about your water pressure, call a licensed, qualified plumber.
WATER
Choose a well ventilated area with temperatures above
55°F
(
13°C
) and below
110°F
(
43°C
). Best results are
obtained between
70°F
and
90°F
(
21°C
and
32°C
).
Installation of the ice maker requires a cold water supply inlet of
3⁄8"
(
6.35 mm
) OD soft copper tubing with a shutoff
valve or drain pump, only to carry the water to an existing drain.
To ensure proper ventilation for your ice maker, the front side must be completely unobstructed. The ice maker may be
closed-in on the top and two sides, but the installation should allow the ice maker to be pulled forward for servicing if
necessary.
LOCATION
ICE MAKER
UNIT DIMENSIONS
E
D
W
27
26
36.5
Full cube size 7/8”x7/8”x7/8”
Half cube 7/8” x7/8” x5/8”
Refrigerant R290
Dimensions are for planning purposes only.
