SnapNrack Array Skirt Installation Manual Download

Page: 1 / 4

Array Skirt Installation Manual









Materials Included

SnapNrack Array Skirt
SnapNrack Array Skirt Frame Mount
SnapNrack Array Skirt Splice
SnapNrack Array Skirt End Cap Pair

Hardware Description

Torque Speciﬁ cation

Array Skirt Frame Mount

5 - 6 lb-ft (60 - 72 lb-in)

3 - 4 lb-ft (36 - 48 lb-in) Kyocera short side

Technical Speciﬁ cations

Dimensions

162” Skirt Length

Material

Skirt and Splice: 6000 Series Aluminum
Frame Mount: 6000 Series Aluminum, Stainless Steel Hardware
End Cap: Rubber

Compatibility

All Module Frames

snapnrack.com

Solar Mounting Solutions

Summary of Contents for Array Skirt

Page 1: ...ardware Description Torque Speci cation Array Skirt Frame Mount 5 6 lb ft 60 72 lb in 3 4 lb ft 36 48 lb in Kyocera short side Technical Speci cations Dimensions 162 Skirt Length Material Skirt and Sp...

Page 2: ...f skirt mount ensuring that shorter end of extrusion is facing up Required Tools Socket Wrench Torque Wrench 1 2 Socket Circular Saw or Portable Band Saw Tape Measure 1 Locate array skirt mounts using...

Page 3: ...for array s Installation Instructions 6A 6B snapnrack com Solar Mounting Solutions 3 6 If array skirt needs to be cut it can be done prior to installation at ground level or on the roof after install...

Page 4: ...tions 7 Rest array skirt on top hook of skirt mounts then push lower hook up and lock into bottom of array skirt Installation Instructions 4 8 If a splice is required install by pushing it equally int...