![background image](http://html1.mh-extra.com/html/smittybilt/q89/q89_installation-instructions_1306084001.webp)
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
(Part # Q89)
Dual Cylinder Air Compressor
WWW.SMITTYBILT.COM
SPECIFICATIONS:
Motor: 12-Volt DC
Maximum working pressure: 120psi.
Maximum re-start pressure: 90psi.
Maximum continuous operating time is 40 minutes.
Recommended on/off cycle time: 20/40 minutes
Overheating Protection Circuit:
The unit is equipped with an automatic protection device. In the event the unit reaches an unsafe operating
temperature, a protection circuit will cut power to prevent damage to the unit. If the protection circuit
activates, immediately disconnect the unit from the power source and allow it to cool.
The unit will cool in approximately 15 minutes, depending on environmental conditions. The protection
circuit will automatically reset itself when the temperature returns to a safe operating level.
High altitude and certain air temperatures can negatively affect the unit’s performance.
WARNINGS:
WARNING!
READ ALL INSTRUCTIONS
before operating product. Failure to follow all
instructions below may result in electrical shock, fire and serious injury or death.
WARNING!
Always wear ANSI Z87.1 approved safety glasses with side shields when operating.
Compressed air and particulate matter can cause eye and soft tissue damage. Keep air
stream away from skin and eyes.
WARNING!
RISK OF BURNS:
Always wear gloves. Some exposed parts may become hot during
use.
WARNING!
RISK TO BREATHING:
This compressor is not designed for and never should be
used as a source of breathable air.
WARNING!
RISK OF ELECTRICAL SHOCK:
This compressor is for use in dry conditions
only.
WARNING!
RISK OF FALLING:
This compressor will produce vibrations and can “walk.” Only
operate at ground level.