background image

27822HSG

Ready

Introduction

Special features include:

 4G Ready - built-in filter removes interference and  

  channel loss caused by 4G mobile phone signals

 Dedicated inputs for UHF and FM/DAB

 Side mounted terminals provide easy cable management

Careline: 08457 573 479 - (Local Rate UK only) 

Support: www.philex.com/support

The SLx range of aerial boosters from Philex is 

designed to improve picture and sound quality 

by amplifying weak UHF, VHF and FM/DAB radio 

signals. The SLx2 can also be used to boost/

distribute Digital Television and Sky™/ Sky+™ signals 

around the home.

Please Note: To view output from the satellite RF2 

output you will need a TV with an analogue tuner.

The SLx2 is not equipped with a digital bypass 

and is not compatible with infra red extenders/

links which control Sky™ boxes from other rooms. 

(Bypass kits are available - sold separately).

Designed with style, sophistication and value in 

mind, the SLx range is the preferred choice for both 

the professional aerial installer and the home user 

wanting to get the very best performance from their 

AV equipment.

With full instructions and wall mounting template, 

installing the SLx2 aerial amplifier is both quick 

and easy.

2 Way Signal Booster

USER GUIDE

Summary of Contents for 27822HSG

Page 1: ...bute Digital Television and Sky Sky signals around the home Please Note To view output from the satellite RF2 output you will need a TV with an analogue tuner The SLx2 is not equipped with a digital bypass and is not compatible with infra red extenders links which control Sky boxes from other rooms Bypass kits are available sold separately Designed with style sophistication and value in mind the S...

Page 2: ...1 Connect your UHF aerial downlead or your FM DAB aerial downlead to the ANT socket 2 Connect your TVs or FM tuners to either of the SLx2 TV1 or TV2 sockets in any combination If your TV does not have a built in Freeview receiver you will need to connect your TV to the amplifier via a Freeview set top box ...

Page 3: ... the system following a short circuit simply remove all outputs and inputs switch off the amplifier and remove the power cable from its socket for approx 30 seconds You should then reconnect the amplifier outputs one by one until you can find which output is causing the short circuit Amplifier features Specifications Inputs Outputs UHF Freq VHF Freq Max output Gain per port VHF UHF Noise Isolation...

Page 4: ...cking freezing or complete loss of picture Ensure that your aerial is a wideband high gain aerial suitable for DTT reception Blocking freezing or complete loss of picture can also occur when the signal is too strong If the signal is still too strong fit a signal attenuator between the aerial downlead and DTT receiver to reduce the signal strength For specific help with digital TV reception problem...

Reviews: