USB Powered
Compact Signal Booster
27815V
User Guide
Support: www.slxtechnology.com/support
Introduction
Congratulations on the purchase of your new
USB Powered Ultra Compact SLx Booster.
The unit fits out of sight behind your TV and
requires no separate power supply unit as
it is powered by one of your TV’s USB ports.
Simply attach it to the back of your TV using
the sticky pads supplied to improve your TV
signal.
SLx Compact Boosters benefit from a number
of features which assist with high quality
distribution of your TV Signals around your
home such as:
• Improved gain flatness to deliver a better
balance across the performance range
• Lower noise figures for optimimum picture
and sound quality
• Greater signal handling capacity to cope
with more channels
• 4G and 5G filtering to provide a typical
40dB protection from 4G and 5G mobile
phone signals reducing interference
• Coaxial connections to fit the standard
plugs on aerial leads
We are sure you will enjoy using your SLx
amplifier, the amplifiers are easy to install and
fully automatic in operation, meaning that
no user adjustment is required and the low
running cost permits continuous operation.
If you have any queries please get in touch
with our technical department at
www.slxtechnology.com/support
Additional Features
All SLx aerial boosters comply with RED
(The Radio Equipment Directive 2014/53/EU)
This booster can also be used to amplify FM
and DAB signals as well as digital TV signals.
Powered
USB Port
“Antenna In”
Socket
Installation
Before installation make sure your TV is
switched off. Select a location on the back
of your TV within comfortable reach of both
a powered USB socket and the “Antenna In”
coax socket.
1. Using the sticky pads provided attach the
back of the booster housing to the location
selected on the back of the TV.
2. Connect the booster output lead to the
“Antenna In” socket on your TV, and
connect the lead from your aerial into the
booster aerial in socket.
3. Plug the booster USB lead into a powered
USB socket on the back of your TV and
switch on your TV.
Your aerial signal strength will now be
boosted by 20dB.
Please Note:
Make sure the booster does not
cover any vents or connector ports.
Booster
Aerial In
Socket
TV Aerial
4G & 5G
filter
