28
8 - Problems and solutions
8.1 - Problems, causes and solutions
Inconvenienti
1- The machine does not start
2- The propeller turns in the opposite direction of the one indicated by the
arrow (on the three-phase model)
3- The product is not ground correctly
Causes
1- The differential switch is in the position “0”
1- The plug switch is in the position "0"
1- Start push button does not work
1- The electric motor is defective
2- Contact technical assistance
3- Plate and blade have not been correctly tightened
3- grooves on the plate or blade is not perfectly sticking
(on the plate plane)
3- Outlet not perfectly introduced into the housing
Solutions
1- Put the switch at position “I”
1- Put the switch at position “I”
1- Contact technical assistance
1- Contact technical assistance
3- Correctly tighten the plate and blade
3- Replace the defective plate couple and the blade
3- Correctly introduce the outlet in the proper housing
1
MEAT MINCER
USE AND MAINTENANCE MANUAL
TC RIO 12
TC RIO 22
TC RIO 32
10/2003
